Reply to Thread

Post a reply to the thread: I need exhaust manifolds for e12 engine

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

Topic Review (Newest First)

  • 02-06-2009, 08:35 AM
    Ex Jag Bloke

    Whoops Gave you wrong VIN. Should be 5505201

  • 02-06-2009, 08:33 AM
    Ex Jag Bloke

    Re: I need exhaust manifolds for e12 engine

    My 1977 630 Csi (VIN 5505433) burned to death over the holiday. I assume the manifold is okay though. Do you have some way I can identify that I have the correct manifold? If you do, you can have it for $10 plus shipping with no warranty etc. Pretty dirty and will have burned bits on it.

    Roger
  • 01-14-2009, 07:13 AM
    mike630csi

    Re: Changes...

    To: FloydR ........... Thanks for the reply. Mike Deen
  • 01-13-2009, 06:01 PM
    FloydR

    Changes...

    I definitely removed the air pump and associated hoses. I seem to recall that I crimped shut an inlet pipe to the intake manifold, and plugged another hose.

    As long as the intake manifold's vacuum lines are plugged, there isn't any problem, as the idle control screw and airflow meter will take care of everything (no ECU on those models.) I don't remember any containers.
  • 01-13-2009, 07:53 AM
    mike630csi

    Re: Google stahl headers

    To FloydR: What other changes did you make, i.e., remove hoses, colored vacuum hoses, the three "containers" on the driver side of the engine department? Any help will be appreciated. I can email you pictures if I have your email address.
    Thanks,
    Mike Deen
    [email protected]
  • 01-06-2009, 12:25 PM
    FloydR

    Google "stahl headers"

    I replaced the reactors on my '77 (that I had many years ago) with Stahl headers. Easy fit, seemed like good quality (although we only had the car a couple of years after that so don't know about longevity.)

    Stahl's catalog still lists it on page 8.
  • 01-04-2009, 04:49 PM
    mike630csi

    I need exhaust manifolds for e12 engine

    I have a 1977 630CSI (with e12 engine) that has thermal reactor exhaust manifold system. I want to switch out for a regular non-thermal reactor system ======= any suggestions will be appreciated. Does anyone hav a set of non-thermal reactor manifolds for sale? Please email me at "[email protected]". Thanks, Mike

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum