Reply to Thread

Post a reply to the thread: Balance problem with upgraded brakes

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

Topic Review (Newest First)

  • 04-06-2009, 08:43 PM
    bmwcs3

    Re: Balance problem with upgraded brakes

    If it was my car, I would switch to either the 3.0CS master cylinder or one from an E12 5 series or early 6 series.

    I've never heard of a proportioning valve going bad.

    When you did the conversion, did you replace the rubber brake lines. They swell internally with age and cause odd problems.

  • 03-12-2009, 04:10 PM
    Asus

    Balance problem with upgraded brakes

    I have a '71 2800CS that has 3.0CS brakes (vented discs front and rear with rear 3.0 semi-trailing arms). Although the hydraulic system doesn’t leak since I rebuilt the calipers, I have poor balance with much less braking in the rear than expected. I suspect that either the proportioning valve is defective or the master cylinder is either defective or incorrect. I don't know anything about the replacement history of the current master cylinder.

    Can the master cylinder be identified by external characteristics? Will using a 2800CS disc/drum brake master cylinder with the 4-wheel disc brake system cause this brake imbalance?

    Could this problem be caused by a defective proportioning valve? Can the brake proportioning valve be cleaned or rebuilt?

    Thanks.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum