Reply to Thread

Post a reply to the thread: Re: Gear grindage when I downshift

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 04-17-2009, 07:29 AM
    asarine

    Re: Gear grindage when I downshift

    Thanks for the reply!! I've actually tried something new. I've shifting between 3500-4000 RPMS in gears 1-4. I've not had the problem in the last few days. I'm still going to try switching to a new fluid...a Redline product. I'll definitely call TMS before I do it. BTW, I love that website. Wow. I even ordered some stuff already!
  • 04-14-2009, 01:14 PM
    JKRIT

    Re: Gear grindage when I downshift

    If it's only happening when U are engaging one gear (3rd) and it goes away when everything is warmed up, then it sounds like your 3rd gear synchro is getting weak, but maybe you can baby it along by trying a different lubricant. I would call Turner Motosports and ask them for advice on which lube, either RedLine MTL or Redline D4 ATF to address your specific problem in your climate.

    Also check the fluid level in the tranny. With age, the seals on the shifter shafts tend to leak and lower the level of oil in the box, which is never a good thing.

    Double-clutching and rev-matching avoid a lot of the wear on the synchros. If U start doing it now, it prolongs the ultimate failure of your synchros.
    '01 325it Steel Blu./Blk
    '98 323is Arctic Sil./Blk, SP
    '97 528i Montreal Blu./Grey
    '95 M3 Cosmos Blk./Blk
  • 04-14-2009, 12:50 PM
    asarine

    Re: Gear grindage when I downshift

    I recently had my entire clutch replaced. It has probably 15,000 miles on it. Anyway, this was going on before I had the clutch replaced and still persists. When I downshift from 4th to 3rd, the gears grind. This happens only on downshift. I'm not doing any double pumping or rev matching. Once I've driven the car for about 20 minutes, the gear grinding goes away. Is this a transmission fluid issue or a hardware problem? My shop replaced the clutch with a Sachs clutch. Thanks for your help!

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum