Reply to Thread

Post a reply to the thread: Aftermarket intake cause mass air flow sensor fail

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.


Additional Options


Topic Review (Newest First)

  • 04-01-2010, 03:25 PM

    Re: Aftermarket intake cause mass air flow sensor fail

    I've heard of so many CE lights going off and codes being set for MAF related issues, (including on my son's car) after installing an aftermarket air intake system that I have to believe there is a relationship.

    Since (blindly) replacing the MAF sensor is so expensive (and time consuming, if you count swapping out intake systems for warranty work), I'd look into different techniques for cleaning the MAF sensor - at least as a first step. There are several solvents (sprays) to clean them, but remember, this is a DELICATE part (i.e., a hair-thin wire), but I wouldn't be afraid to try it. Some methods involve careful spraying, others involve pouring a limited amount of electronic-friendly solvent in a plastic bag and carefully agitating, while both require thorough drying afterwards.

    Search the web, g'luck!
  • 04-01-2010, 02:19 PM

    Never had a problem

    FWIW, I've had the same ECIS CAI on two successive 330Ci's since 2001(2001 & 2004 models) and never had a problem.

    BTW, A number of dealers will claim that K&N type oiled air filters will ruin the MAF with a deposit of oil. Don't believe it. If that happens you can contact K&N, they are very protective of their products and will fight the dealer/manufacture on your behalf, ever as far as having the failed MAF tested.
  • 04-01-2010, 02:12 PM

    There appear to be cases where it does

    If you search here, you'll find other tales like yours.
  • 04-01-2010, 01:35 PM

    Aftermarket intake cause mass air flow sensor fail

    Hello all,

    I have a 2005 330CIC zhp which I love as a weekend car. It's still under warranty, and though I love the OEM look of it, I started to tinker with aftermarket upgrades.

    One of the first thing I tried was East Coast Induction's Intake, which seemed to give me a bit more boost. Had it for about 1 month (500 miles, don't drive much), but then the SES (service engine soon) light came on over the weekend.

    Under warranty, but didn't want to have dealer see my ECI intake, I put the stock intake back on, and took it to dealer. The dealer ran many tests and diagnosed it as Mass Air Flow Sensor failure, and replaced it.

    Now, I'm not sure if I should put the ECI intake back on as I am afraid, this may have caused the original SES light to come on. I searched the board, but found no info. Is it just a coincidence or can aftermarket intake 'confuse' the OEM mass air flow sensor?

    Thanks in advance,

    || 98 540iA Sport || Don't have time for MODS yet ||

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum