Reply to Thread

Post a reply to the thread: Okay folks, top this one.......

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 06-06-2010, 11:53 PM
    dusty21

    No Way - But thanks for the info

    Replaced the clutch, throwout bearing and hydraulic
    actuator on my '90 535i 5sp at 98K miles, it is
    still working at 240k miles...

    May have to crawl under it soon and remove the exhaust,
    driveshaft, and torx screws on the tranny to replace it
    all over again..
  • 06-06-2010, 09:48 PM
    Big Dog

    Okay folks, top this one.......

    Well it finally happened, time for a new clutch in the '91 535i and we decided to do the upgrade to a lightened e28 flywheel along with an e28 m5 clutch and pressure plate. Actually the only reason to change was the release bearing that had started making noise, so we got all the parts (new guibo, center support bearing, bolts, etc.) and pulled the sucker apart. The clutch disc still had a good bit of material(!) but the pressure plate fingers were all tired and the release bearing was shot. There were a few minor problems, such as a rounded head on a bell housing bolt, frozen pressure plate bolts and the exhaust being a bear to get back on, but we prevailed. Once things were back in place my son asked "when was the last time we changed this thing?" I pulled the service records and after some quick subtraction, the answer: 290,417. Car now has 385k on the clock (first clutch was done by the dealer for the first owner).

    Dog

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum