Reply to Thread

Post a reply to the thread: 1987 325i Runs Rough Cold

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 10-15-2010, 09:37 AM
    Bill-H

    Just keep it running

  • 10-13-2010, 01:37 AM
    ApocalypseNotNow

    whatever you do don't start replacing stuff...

    do basic tests. first on the list would be the low and high temp switches, next test your oxygen sensor. if it only happens when the engine is cold how could it be due to an intake manifold leak? you mean the leak fixes itself when the engine gets hot? :))
  • 10-04-2010, 08:44 PM
    jackbaggins

    Sounds like your car needs a tune up

    Replace anything that you don't know the age of, like plugs, some of the upper intake gaskets, check for vacuum leaks, etc. Remember, your car is 23 years old. By the way, it's NOT the o2 sensor as that doesn't come into play until the car is warmed up.
  • 09-23-2010, 08:02 PM
    ed

    Re: 1987 325i Runs Rough Cold

    mine is doing same thing. glad to see I'm not the only one. will check mine too. :)
  • 08-10-2010, 09:06 AM
    blacknbluebmw

    Re: 1987 325i Runs Rough Cold

    i agree with intake leak. had the same issue with my '87; replacing the intake gasket fixed it up.
  • 08-03-2010, 08:45 AM
    jlevie

    Re: 1987 325i Runs Rough Cold

    That sounds like the result of intake leaks. A smoke test of the intake will reveal any and all leaks.
  • 07-26-2010, 10:55 PM
    BeerGeek

    1987 325i Runs Rough Cold

    I have an '87 325i convertible (122K). It runs rough when it first starts up, missing and sputtering a bit. After it warms up, it runs fine.
    If I start it up and drive to the gas station - 3-4 miles - it will run rough on the way. I shut it off, put gas in it (the car will sit for 5-10 minutes) and start it back up, it runs smooth.
    If I don't stop for gas, and drive past the station, it's another 3-4 miles before it smooths out, so it's something under the hood that needs to get hot.
    Coil?
    Regulator?
    Wires?
    Distributor?
    O2 Sensor(s)?

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum