Reply to Thread

Post a reply to the thread: ignition switch problem

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 01-29-2011, 11:31 PM
    94583

    Re: ignition switch problem

    yea...connect the ews ring up and place the key in between the ring. remember, you have to "trick" the ews module that the key is in place
  • 10-27-2010, 08:00 PM
    dlpweb3

    ignition switch problem

    Had the 'spinning key" this morning and car would not turn off till I disconnected the connector from the ignition switch. Assumed it was the switch (electrical part) but that seems to be fine - problem looks like a mechanical problem in the cast lock assembly.

    Got the assembly off the car - can't get the lock cylinder off to see inside, but probably need a new assembly.

    In the meantime, wanted to simply actuate the ignition switch with a short screwdriver.

    Unfortunately, car powers up but will not run the starter motor. And, of course, can't get my TIS to load up, so am fishing in the dark.

    Violet and black/yellow get battery voltage in 'start' (using screwdriver) -- so probably there is something else in the driveaway protection circuit that is preventing the starter solenoid from firing.

    Anyone have any ideas? I'm ready for dynamite.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum