Reply to Thread

Post a reply to the thread: Defective aftermarket MAF...

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.


Additional Options


Topic Review (Newest First)

  • 11-17-2010, 01:07 PM

    Re: Defective aftermarket MAF...


    I am experiencing the same codes and have changed the same things you have changed except the MAF. I've inspected the intake boots before to find no cracks. I'll just replace them anyway this weekend to see if that helps. hoping to discover a crack on the underside of the boots or somewhere obscure.

    thanks for your info.2000 528i
  • 11-09-2010, 01:44 PM

    More junk from ebaY.

    Ed in San Jose. BMW CCA member since 1987 (Nr. 62319). Golden Gate Chapter. '97 540i 6 speed. Build Date 3/97. Aspensilber over Aubergine leather.
  • 11-08-2010, 10:08 PM

    Defective aftermarket MAF...

    After replacing the MAF sensor and the intake boot this past June, the P1188/9 codes popped up again about a month ago. I was experiencing very rough cold idling and bad hesitation from a dead start. So after replacement of the pre-cat O2 sensors, valve cover gasket and CVV didn't resolve the problems, this past weekend just for yucks I put back in my old MAF sensor and voila problems resolved. Made about a dozen around town trips with no hesitation whatsoever, and no cold start idling problem.

    So my original problem back in June turns out to have been just the cracked intake boot.

    The replacement MAF was an aftermarket eBay purchase.

    Just wanted to pass this along to everyone.


Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum