Reply to Thread

Post a reply to the thread: dreaded heater stuck on cold

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.


Additional Options


Topic Review (Newest First)

  • 01-17-2011, 05:40 PM

    The valve assembly has 2 solenoid coils and 2 cone

    shaped valve plungers. The signals from the IHKA cause the solenoids to move the plungers up-down to send hot water to each half of the heater core. The valve assembly can be taken apart, carefully. I think there are pictures on the web, probably on Do a search there. The valves sometimes get clogged.
  • 01-11-2011, 02:20 PM

    Re: Not only does the pump have to work but the 2

    to be honest,i dont know?
    i take it they should move the plunger if there working?
    if i remove the valve and plug the wires back in and alter the temp switches the plunger should move?
    have i got it right?
    daveowning the dream is a reality
  • 01-10-2011, 07:14 PM

    Not only does the pump have to work but the 2

    solenoids have to work also. Do they?
  • 01-10-2011, 12:49 PM

    dreaded heater stuck on cold

    hiya all
    i have just bought a late 95 740a,im in the uk.
    i have read many many posts on here about the heater issue but mine doesnt seem to be covered.

    when i bought the car i never noticed there was no heat out of the heater matrix,heater controls all seem to be fine,temp goes up and down on display but none out of vents,blower speeds up and slows as it should.centre dash vent set on red dot not blue.
    i have noticed that theres no blowing on the drivers footwell either.i suspected the heater valve on engine bulkhead.i took it of and connected the electrical wires to it,the pump operates.
    i connected it back to the pipes and bled system.
    still no change.
    reading other posts it only mentions failing in the hot position not the cold.
    as the weather has been in the minus for a few weeks i darent drive it for fear of freezing inside the car.
    any ideas guys?
    daveowning the dream is a reality

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum