Reply to Thread

Post a reply to the thread: Blowing smoke at startup but head gasket good...

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 01-26-2011, 08:03 PM
    jimlev

    Mine were about 1" long. That is why I threw the (

    torx bolts away and used regular hex head bolts on the CCV and throttle body plate to the manifold.
  • 01-26-2011, 01:24 AM
    ExAlfa

    1/4" ratchet + hand to push hard into bolt don't!

    Maybe my torx bits are on the longish side. I wasn't able to shove the bit into the bolt and hold it in place as I wrenched (torqued the torx?). The bit driver made a more compact fit and has a longer lever arm. My bolts were really tight, too.
  • 01-25-2011, 08:23 PM
    stevek201

    Greg Site address is what you found I think

    http://blog.bavauto.com/bmw-e46/bmw-m54-6-cylinder-crankcase-ventilation-pcv-diy-325i-328i-330i-525i-530i

    This will take you to the page, it is the M54
  • 01-25-2011, 08:09 PM
    jimlev

    1/4"drive ratchet bit & torx bit will fit in there






    "Drive It Like You Stole It, A Sickness for Quickness"
    The Bottle Rocket "King of Spray" 2 Stage Nitrous Oxide
    Dare to be different and stand out among the crowd of me-to-cars!
    No guts, no glory! Tire smoke, not traction control!
    Zionsville all aluminum radiator to replace the 3 leak prone Nissens Radiators!

    NOS Progressive 2 Stage Controller with port injection
    Snow's Performance Methanol/Water Injection
    Dinan downloads, VAC Under Drive Pulleys
    Dinan Carbon Fiber CAI
    Dinan Front Strut Bar
    Electric Cooling Fan w/PWM controller
    NGK Iridium Plugs
    DDE Enhanced Angel Eyes, Smoked Lenses
    Koni FSD's/H&R Springs, BAV Brass Caliper Bushings
    Eisenmann Race Exhaust (from H8-Rain's car)
    ///M5 3.15 LSD
    ///M5 Sway Bars, Front & Rear
    Energy Suspension Polyurethane Sway Bar Bushings
    ///M5 Gauge Cluster Rings ///M5 Lip Spoiler
    ///M5 Mirrors and Switches
    Leather Z weighted shift knob (thanks H8-Rain)
    Rogue “Octane” Short Shift kit w/WSR
    Rogue Tranny Mounts
    StopTech Brake Lines Front & Rear
    Axxis Deluxe Plus pads Front & Rear
    Staggered M Parallel 66, Xenons
    Modified CDV, UGDO
    Euro Storage Tray (thanks Zombywolf)
    Redline in Diff and Tranny
    Passport 8500 X50, Escort ZR3 Laser Jammer
    G-Tech/Competition Pro Data Logger
    Auto Enginuity OBD-II Scan Tool
    25% Tint, X-Pel, LoJack
    PIAA Driving Lights
    BMW CCA Member Boston Chapter
  • 01-25-2011, 04:00 PM
    edjack

    The six has a unique problem in that the>>

    oil separator is in such a position that it gets little engine heat. The V8 separator is snuggled in behind the front cover, and gets much engine heat, so sludge doesn't seem to form as readily.
    Ed in San Jose. BMW CCA member since 1987 (Nr. 62319). Golden Gate Chapter. '97 540i 6 speed. Build Date 3/97. Aspensilber over Aubergine leather.
  • 01-25-2011, 11:06 AM
    ExAlfa

    I did my V8 CCV, same symptoms

    Heavy oil smoke at start-up, rough idle, goes away in time. I tolerated four starts before digging into it. Maybe it was because my first start was in front of 70 bike racing friends who then filled me with comments about my POS German hotrod pimp-mobile for the next three hours of racing.

    The CCV is a bugger to get off on the V8 because it is on the back of the manifold very close to the firewall. The torx bolts get tight in the plastic, and there isn't room enough for a socket drive. I used a hex drive torx bit in a 1/4" drive breaker bar. There is a silicone diaphragm that was torn. When removing the CCV use care (wiggle slowly) so the vent tube running fore to aft through the manifold is not dislodged from the fore recess it pushes into. If it comes out a mirror and flashlight may be used to get it back in place if you are a tiny gymnast. Otherwise it's easier to remove the manifold. Putting the new CCV on is easy and reconnecting the hoses is easy. Maybe two and half hours? Fortunately for me it was May and warmish. Hopefully you have a warm bright place to work in.

    Here are some links that need the spaces removed;
    http://home.c o m cast.net/%7Evicent/osve38.html
    http://forums.b i m merforums.com/forum/showthread.php?t=1445581
  • 01-24-2011, 11:36 PM
    jimlev

    The V8 is about a 2 hr job






    "Drive It Like You Stole It, A Sickness for Quickness"
    The Bottle Rocket "King of Spray" 2 Stage Nitrous Oxide
    Dare to be different and stand out among the crowd of me-to-cars!
    No guts, no glory! Tire smoke, not traction control!
    Zionsville all aluminum radiator to replace the 3 leak prone Nissens Radiators!

    NOS Progressive 2 Stage Controller with port injection
    Snow's Performance Methanol/Water Injection
    Dinan downloads, VAC Under Drive Pulleys
    Dinan Carbon Fiber CAI
    Dinan Front Strut Bar
    Electric Cooling Fan w/PWM controller
    NGK Iridium Plugs
    DDE Enhanced Angel Eyes, Smoked Lenses
    Koni FSD's/H&R Springs, BAV Brass Caliper Bushings
    Eisenmann Race Exhaust (from H8-Rain's car)
    ///M5 3.15 LSD
    ///M5 Sway Bars, Front & Rear
    Energy Suspension Polyurethane Sway Bar Bushings
    ///M5 Gauge Cluster Rings ///M5 Lip Spoiler
    ///M5 Mirrors and Switches
    Leather Z weighted shift knob (thanks H8-Rain)
    Rogue “Octane” Short Shift kit w/WSR
    Rogue Tranny Mounts
    StopTech Brake Lines Front & Rear
    Axxis Deluxe Plus pads Front & Rear
    Staggered M Parallel 66, Xenons
    Modified CDV, UGDO
    Euro Storage Tray (thanks Zombywolf)
    Redline in Diff and Tranny
    Passport 8500 X50, Escort ZR3 Laser Jammer
    G-Tech/Competition Pro Data Logger
    Auto Enginuity OBD-II Scan Tool
    25% Tint, X-Pel, LoJack
    PIAA Driving Lights
    BMW CCA Member Boston Chapter
  • 01-24-2011, 10:22 PM
    gc

    Would you mind posting a link to this Bavauto

    blog site? I found one entry for the M54 engine. Looks similar to my M52 6... or is this the entry to which you were refering?
    Thanks.
    Greg
    2000 528
  • 01-24-2011, 07:06 PM
    stevek201

    My vote CCV

    Do you live in a cold climate? that's when the CCV problem will show up.BMW found out that they needed to insulate all hoses and the unit itself in cold climate areas. Just did mine on a 03 530 6 cylinder don't know how bad a job it is for the 8. No problem in the summmer as soon as it starts to freeze out, smoke at start up and sometimes when I was going down the road huge clouds for 5 seconds then nothing for a few days then back again. I bet that's your problem. It's a oil separator system and when it plugs up it sucks oil into the intake and that's what causes the smoke.If you unclip the top hose that goes to the unit I would bet you will fined like a yellow whip cream plugging the hose. When I took mine out it was everywhere in the system.
    Hope this helps. It took me about 10 hours to do mine, and about $175 in parts. Now that I did it I could do it a lot faster. Bavarian Auto parts blog has a great picture article on how to do the 6 cylinder.
  • 01-24-2011, 09:36 AM
    Poindex30

    Re: Sounds like you CCV

    Thanks Whorse. I really hope it is my CCV. For a while I was thinking about almost giving my car away since I thought the entire engine needed removing.
  • 01-24-2011, 12:53 AM
    horse325es

    IF its not CCV related -might be your valve guides

    You sure its oil burning?

    Andreas
    Queens NY
    BMWCCA# 186796
    86 325es (wrecked by careless driver)
    87 325 300k (project for life)
    00 540is 6spd 180k (daily driver)
  • 01-24-2011, 12:51 AM
    horse325es

    your^



    Andreas
    Queens NY
    BMWCCA# 186796
    86 325es (wrecked by careless driver)
    87 325 300k (project for life)
    00 540is 6spd 180k (daily driver)
  • 01-23-2011, 11:48 PM
    horse325es

    Sounds like you CCV

    Its a common problem
    I haven't had this happen (yet:|) but what your describing sounds like what happens when the CCV is clogged/broken. BUT im not sure if it stops after the car is warmed up and the crud in the CCV gets softer.

    Here's a DIY link
    CLICK HERE

    Andreas
    Queens NY
    BMWCCA# 186796
    86 325es (wrecked by careless driver)
    87 325 300k (project for life)
    00 540is 6spd 180k (daily driver)
  • 01-23-2011, 11:30 PM
    poindex30

    Blowing smoke at startup but head gasket good...

    ... I think. I haven't done a compression check.

    I have a 2000 540i with 154k miles. It has a slightly rough idle when the engine is cold but other than that it runs great. It isn't losing coolant and isn't losing much oil but often at start-up it blows out a huge amount of oil smoke.

    There is no coolant in the oil and no oil in the coolant reservoir. This has been going on for about 4 months. I just bought a new car to replace it but I don't want to give up my 540.

    Does anyone have any idea about what I can check to find out what the problem is? I know the valve cover gasket leaks but the smoke is from the exhaust pipe and not the front of the engine.

    Thanks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum