Reply to Thread

Post a reply to the thread: Trouble moving electric seat back

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

Topic Review (Newest First)

  • 05-05-2011, 11:32 AM
    ssippishark
    Quote Originally Posted by ssippishark View Post
    I fixed a headrest with this link. I just love it when I can fix anything with a coathanger. Look at #56.

    95 525IT
    86 635csi
    Yes | No
    headrest fix-Q's famous coat hanger trick

    It's still hard to believe, even after doing it, but the Coat Hanger Trick Works !!

    If you are referring to the front seat headrests...then once you remove the back cover, peel back some of the leather from the tongs near the motor that should be mounted on the right side...remove the 2 screw that hold the motor (a right angle screwdriver makes this a lot easier)...then remove the screws on the bottom of the motor that secures the cable...pull the cable out. HERE'S THE QUICK TIP: take a 1/4" piece (straight) of metal coat hanger and place into the motor drive, then re-insert the cable. Test to make sure headrest is working then put everything back together. I know it sounds weird but it has worked for me and I did the procedure 2 years ago.

    IMPORTANT TIP: make sure you don't use a too long piece of metal because then the cable will not engage the drive and the headrest still won't work. The "metal extension" serves to re-center the cable within the sheathing.
    Q
    91 735iL
    Shogun's E32 Tech Tips: http://tridem.han-solo.net/auto/erich/auto.htm
    Sorry bout the missing link - hope this helps
  • 04-26-2011, 06:10 PM
    TaylorM
    Sounds like a funky switch to me. Pull it out, sand down the prongs to shiny brass, pack in dielectric grease and try again.
    Grease the seat rails a bit too to help the motor out.
  • 04-25-2011, 07:54 PM
    jfrazier
    I missed your link. Can you send it to me.
  • 02-23-2011, 09:23 PM
    ssippishark

    Re: Trouble moving electric seat back

    I fixed a headrest with this link. I just love it when I can fix anything with a coathanger. Look at #56.

    95 525IT
    86 635csi
  • 02-18-2011, 08:41 AM
    Jim72

    Trouble moving electric seat back

    Guys

    I have an 88 M635 highline with electric seats. Recently I had trouble moving the driver's seat backwards. When I pressed the button, I could hear a clicking noise from unnder the seat, but there was no movement. After trying everything I could think of, I eventually pushed the button in and out quite quickly and the seat started to move again.

    Any ideas what could cause this problem?

    Thanks in advance.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum