Reply to Thread

Post a reply to the thread: DME MSS54HP --- HP=High Performance

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.


Additional Options


Topic Review (Newest First)

  • 04-10-2009, 06:19 AM
    om ncioupml

    Re: Do you have an MSS54'HP' schematic

    om nci20 ncoiupm ncoiuuodeassde mss54 ncoi5 ncoipiom ncmo ncompuode copmk ncopopml ncop
  • 04-16-2004, 08:58 AM

    You going to test? I believe cars serial number is

    programmed into the software.///MPowerMe
  • 04-16-2004, 08:06 AM



    "Not all ///M owners are ///M Drivers" by: Enzo Ferrari, Adapted to ///M

    R.I.P. will not be forgotten! 4/5/03

    Miami, FL
  • 04-16-2004, 02:08 AM

    5WK9326 and 7 835 564

  • 04-15-2004, 10:43 PM

    I assumed as much....

  • 04-15-2004, 09:53 PM

    No sense in manufacturing two DMEs

    with different speed and memory capacity so it's probably just common sense to use the latest DME of this MSS54 family. Including this HP version there have been 8 different hardware versions of the MSS54 since the start in the E46 M3.

    Whre is the E46 M3 EVO...? :-)

  • 04-15-2004, 09:47 PM

    ? CSL-variant in 06 to keep interest hi before

    Ok so the CSL stopped production right? Even when it was in production, parts were rare because presumably production was limited.

    So what if BMW were to have invested in new infrastructure to enable a end-of-model e46m3 CSL or CSL-variant to keep sales up & prevent flagging sales in anticipation of the e90 V8? This rationale has been certainly used by other manufacturers.

    The use of the CSL-DME in non-CSL m3's would be consistent with this idea. Otherwise, why invest in improving the DME capacity and processor if the HP were to be 333 hp till the e90 V8 appears? Hence, i'd predict that at the very least, a small HP bump might appear by the last M3 model yr, be it 05 or more likely 06.

    wishful thinking admittedly...

  • 04-15-2004, 09:42 PM

    Sorry I don't have any MSS54HP schematic

    But it I think the rest of the in- and output signals are the same. Is Oscar based in the US or in Germany?

  • 04-15-2004, 09:35 PM

    Do you have an MSS54\'HP\' schematic

    Oscar is an offshore tuner that has a lot of behind the scenes on the software tuner world. He is one who I turned to to program my 2004 M3 and my old 2001 M3 race car. I'll email you his contact info if you would like.
  • 04-15-2004, 09:21 PM

    Probably the latest MSS54 version (not HP)

  • 04-15-2004, 09:19 PM

    See this MSS54 schematic

    The only difference I can see is the air mass and temp signal, the rest of the sensors must be the same and the M track mode button the only addition. What bothers me is the different part numbers on the uncoded M3 and CSL HP DME. Who is Oscar?


  • 04-15-2004, 09:16 PM

    I'm having the DME replaced in my '02 will I get

    this one or the same version I had? NE thoughts?
  • 04-15-2004, 09:10 PM

    I just sent Oscar and email

    asking him this, here has two CSL's that he can play with ;-)
  • 04-15-2004, 09:09 PM

    I believe the HP variant gets you 40% more hot

    Silver Gray/Imola Red 2004 M3 - SMG, Prem., Nav, Htd. Seats, Adj. Lumbar, Xenon, H/K, PDC.
  • 04-15-2004, 09:05 PM

    Interesting question since the CSL also

    have more and slightly different tuned performance controls like the M track mode built into the DME software. The 134 pin interface is probably the same and a lot of the communication is via the CAN-bus so why not if you also install the CSL temp sensor in the new airbox.

  • 04-15-2004, 08:52 PM

    A big question would be

    Using this newest version DME 'HP' from a 2004 E46 M3 if one could load CSL code onto it and then attach the harness and hareware (airbox, etc) would it work ? ...
  • 04-15-2004, 08:40 PM

    ya i know, can't believe you're still up

  • 04-15-2004, 08:38 PM

    It's late over here :-)

  • 04-15-2004, 08:37 PM

    LOL no you are right. See conclusion above

  • 04-15-2004, 08:35 PM

    hey do!

    What's happening man :)

This thread has more than 20 replies. Click here to review the whole thread.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum