Reply to Thread

Post a reply to the thread: ZOOOM gets a Clear Bra..........long

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.


Additional Options

Topic Review (Newest First)

  • 07-29-2010, 10:26 PM

    Are you aware that you replied to a....

    question / statement that was posted 6 years ago?

    It amazes me that this forum gets very little use.

    Scott Pettit
  • 07-28-2010, 05:49 PM

    Re: Question and a concern

    Depends more on what brand of film and how you maintain it. 3M and clearshield use a true clear coat on their film. Thus, it's very close to automotive clear coat. It'll allow the passage of UV rays through the film, and give you a uniform overall fading with minimal amount of preventive maintenance done to the film. As for other films, most use a 'top coat', which is up to your imagination. Some of those film, without constant maintenance, will dull, turn brownish, fade, etc. after a short period of time expose to the environment. So when they are not clear anymore, your paint will, logically, start to fade unevenly from sun exposure. Don't get me wrong, if you keep your car in the garage 11mths out of the year like an exotic car owner, any film will look great for years with proper maintenance. <b><center>Clear Bra Specialist<br><br>
    <img src="">
  • 12-25-2008, 01:21 PM

    you need help ;]

  • 12-23-2008, 10:01 AM

    depends on your color. RED? then yes

    because it tends to be most sensitive overall. Silver or black--- probably not...
  • 12-23-2008, 09:44 AM

    have him do the A-pillars as well

    Did you do anything in front of the rear wheel well for stone chips?

  • 07-14-2004, 04:00 PM

    Did the bra cover the chips?

    Or can you still see them? My car is being re-sprayed right this very minute for a pristine, new-car look. I had more than a few unsightly chips with black showing thru the ti-silver. Once I get to HC, I will have the clear bra installed.<img src="">
  • 07-14-2004, 02:56 PM
    Fat Sound

    Question and a concern

    I've been wanting to have a clear bra put on the front of my Z4 for a few months now, but I have a concern that no one seems to be able to address. I was wondering if the guys that did your install gave you any info about paint fade. I know that these clear products are all advertised as "UV stabilized" as in UV reflective. My fear is that I would peel this stuff off 4 years from now and find that the paint has faded everywhere except under the clear bra.
    The guys I have talked to have not had enough experience to know if this is a problem or not.
    Since the people you worked with have been installing this for 10 years I thought they might.
    Any insight you can offer based on talking with them?
  • 07-14-2004, 01:54 PM

    Victoria Secret Bras don't look that nice...Cool

  • 07-14-2004, 09:52 AM

    Re: Which installer in SoCal?

    Sorry, price is $525. XPel Kit - (hood kit, bumper kit, headlamp kit)<B>arnolds</b>
  • 07-14-2004, 07:42 AM
    You can stretch it a bit more, but...

    1/8" border.

    be careful not to get it too close to the radius or it might not stick. Also that bumper kit is a son-of-a-** to install. It requires a ton of stretching on the x and y axes. The better way to go is to find a qualified installer and pay him what he wants to put it on right. Unless you have a lot of time and up for a challenge.
  • 07-14-2004, 03:35 AM

    Re: ZOOOM gets a Clear Bra..........long

    The chick car looks good in a bra.
  • 07-14-2004, 01:32 AM

    Re: ZOOOM gets a Clear Bra..........long

    Looks great, down in South Seattle here, looking to get mine done sometime next week or so.
  • 07-14-2004, 01:01 AM

    Which installer in SoCal?

  • 07-13-2004, 11:58 PM

    After 15,000mi. definitely had a few chips

    <img src=>
    Z4 Merlot 3.0 Sport blk/beige
    Member: BMWCCA Puget Sound Chapter(Seattle)
    The ZSCCA
    <img src=>

  • 07-13-2004, 10:03 PM

    Very cool...

    I got quoted 425 installed here in So Cal.<B>arnolds</b>
  • 07-13-2004, 07:17 PM

    Does the 3m protect the paint against UV?

    Does the 3M protection help with UV damage of the paint also? Do you just wax around the product?
  • 07-13-2004, 06:33 PM

    Re: Nice job!

    I had it done pre delivery, it's well worth it
  • 07-13-2004, 06:08 PM

    About that hood...

    Did Dean overlap the edges of the hood piece, or did he leave a 1/8" border?
  • 07-13-2004, 05:50 PM

    Nice job!

    Getting mine done in a few weeks at HC. Sadly, I have to get the nose re-sprayed tomorrow before having the bra installed. You must not have had any chips?<img src="">
  • 07-13-2004, 05:30 PM

    ZOOOM gets a Clear Bra..........long

    How's that for a "hook?" lol. After 15,000mi, the Z was way overdue for her first "bra". I had the pleasure of returning to "Clear Statements" in Lynnwood, WA.(third Z) for the 3M protective coating. Dean the owner has been in the "bra" business 10 years. He and his partner Mike are the best at what they do in my opinion. On my Z4 they covered the bumper/spoiler, 12" on the hood, side mirrors, 1/4" on door edges, and exta product on the lower edge of spoiler, which really gets the abuse.
    Advise to new owners don't wait to have this important protective
    product put on like I did, have it done at as soon as you get the new Z.

    Clear Statements...... tell em Denise sent ya

    Inside shop

    Z up on the lift

    Mike cutting the 3M product

    Dean sprays a soapy mixture on surface first then slides the film in place then uses a small plastic tool to smooth it out, very tricky

    The hood piece is applied

    Line barely visible, lucky to get this shot of it

    The Masters Dean and Mike

    Finished... back at home with the brand new, comfortable "bra";)

    Side note... I think Dean is doing all right
    <img src=>
    Z4 Merlot 3.0 Sport blk/beige
    Member: BMWCCA Puget Sound Chapter(Seattle)
    The ZSCCA
    <img src=>

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum