Reply to Thread

Post a reply to the thread: Need so help . 1988 528e.

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

Topic Review (Newest First)

  • 08-11-2010, 11:34 PM
    meyere30

    Air meter dead and so is the cat :(

  • 08-11-2010, 11:49 AM
    meyere30

    The sensor up front is the temp gauge sensor.

  • 08-11-2010, 10:07 AM
    meyere30

    No cold start valve. The one at the front is

    a brown plug and single wire.
  • 08-11-2010, 02:30 AM
    TJ

    Re: Need so help . 1988 528e.

    The thermo time switch (usually a brown plug) should be open above 95F. Below that temperature, it should be closed for a limited time when starting, causing the cold start injector to spray. If you suspect that the switch is causing a rich mixture by being closed when it shouldn't be, simply unplug it. With that being said, the `88 doesn`t even have a cold start valve or thermo time switch does it?? Check your coolant temp sensor resistance (probably a blue or beige plug), then fuel pressure.
  • 08-10-2010, 09:42 PM
    meyere30

    Need so help . 1988 528e.

    The switch on the thermostat housing all the way to the front is the thermo time stitch right? It should be closed above 120 deg F right? Car is running rich and failed smog big time at idle. All the usuals were replaced as O2 sensor. cap and rotor, plugs, valve adjustment and oil. But its rich. I now suspect the time switch is not closing and the car is dumping to much fuel.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum