Reply to Thread

Post a reply to the thread: Check engine light on and is throwing 2 codes...

Your Message

Click here to log in

Please correctly re-type the phrase f o o t d o c t o r in the form box. Re-type it without the extra spaces and put the one space where it should be. We apologize for having to do this but this silliness helps slow the spammers.

 

Additional Options

HTML

Topic Review (Newest First)

  • 12-27-2010, 08:52 PM
    Vice

    Re: Buy an OEM sensor, with a BMW logo.

    Well I bought OES (S=supplier) CPS. You could see where they melted away the BMW logo from the CPS housing. It's been two weeks and no CEL! I guess it was the CPS.
  • 12-13-2010, 07:17 PM
    wpeterso

    Re: Buy an OEM sensor, with a BMW logo.

    I hope it is just the CPS. Don't know why it would throw a 1519 code?'97 M3 Bright Red, '98 528i Black
  • 12-13-2010, 01:10 AM
    edjack

    Buy an OEM sensor, with a BMW logo.


    Ed in San Jose. BMW CCA member since 1987 (Nr. 62319). Golden Gate Chapter. '97 540i 6 speed. Build Date 3/97. Aspensilber over Aubergine leather.
  • 12-12-2010, 08:00 PM
    Vice

    If the vano's...

    If it is the vano and I just ignore the issue, besides losing power will this leave me stranded? I'll replace the CPS for now, I just want to make sure the Vano code won't leave me broken down.

    Again at this point car runs just fine for 160,000 miles.
  • 12-12-2010, 07:16 PM
    Vice

    Re: Both codes point to the cam position sensor>>

    Interesting! I'm going spring for a new CPS (again)and hope that's the issue.
  • 12-12-2010, 04:37 PM
    wpeterso

    Re: Both codes point to the cam position sensor>>

    I too have a 98 528i that is throwing those 2 codes. P1519 = "A" Camshaft Position Actuator Bank 1. The Vanos actuator. I also have a 97 M3 and have swapped the CPS and actuator from it to the 528i and vice versa. Intermittant on 528i and no issues on M3. Been wrestling with this for months. Finally bought a used Vanos and actuator from a junkyard, but have not swapped yet.
    Everyone says to get a new CPS, but I'm not convined that is the solution. May be cam timing or a Vanos issue.
    '97 M3 Bright Red
  • 12-11-2010, 09:20 PM
    Vice

    Re: Both codes point to the cam position sensor>>

    Hi Ed,
    Yes, I bought the CPS from Crevier in 2007 ~(April).
  • 12-11-2010, 09:16 PM
    edjack

    Both codes point to the cam position sensor>>

    Did you buy the CPS from a BMW dealer?

    Might also check the connector to make sure it's clean.
    Ed in San Jose. BMW CCA member since 1987 (Nr. 62319). Golden Gate Chapter. '97 540i 6 speed. Build Date 3/97. Aspensilber over Aubergine leather.
  • 12-11-2010, 08:10 PM
    Vice

    Check engine light on and is throwing 2 codes...

    I have a 98 528. Two days ago the check engine light came on. I was hoping it was a gas cap issue. After a few starts the light went off. Yesterday the light came back on again. 3 years ago I had the same issue and it was the Cam Position Sensor which I changed and fixed the issue of the engine light.

    Today I went to auto zone and had the codes checked:

    I had the P0340 code twice and P1519 once.

    This issue is that I'm not sure if the P0340 is old or new? Could the Cam Position Sensor be going bad after 3 years? Or is the P0340 an old code and now it's the P1519 code causing the issue. I'm not sure if I cleared the codes 3 years ago. I would hate to buy a new CPS if I don't need it.

    Now I have no idea what the P1519 is and how to fix. Any advice here?

    The car runs like a champ. Plenty of power and runs smooth. I would hate it to be the CPS and get stranded.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum