Re: My Windshield washer hose has split.
I bought a packaged 7/32" hose 6ft long, Prestone brand #WV0732 for $2.99. and an assortment of vacuum connectors, Vacu-tite(Dorman) brand #47307 for $1.99. (connectors used to connect the hose to nozzle. I used 1/4" connectors for this.)
Basically all the factory plastic hoses broke in the process of removal, including the L shaped plastic hose that goes through grommet. I was able to save/reuse the factory "Y" connector. I also replaced a short section of flex hose, between L shaped plastic hose and the union at Hood Lift-support. I had to use a drill and drill bits to make the hole on the grommet a little bigger. I warmed up the grommet in hot water, used some liquid soap and 7/32" hose went through the grommet just fine.
Windshield washer works just like factory once again. All for less than $5 in parts from Autozone. I actually ended up with a few inches of hose left.