I think I'd check the temperature senders and
Re: I think I'd check the temperature senders and
Before you start pulling injectors try some good gas and some injector cleaner. Make sure the air cleaner element is clean, plugs are in good shape, cap/rotor are ok. To check all of this takes about an hour max.
My guess is the plugs are fouling slightly during the cold start cycle which is pretty rich. At start up I'm measuring 13.2-1 on my wide band.
Where will I find the temp sensors?
I replaced everything but the wires 10-12 mos ago
but I'll pull the plugs to be sure. Someone told me that the plugs wires don't go bad often cause they're stainless. I don't know if I believe that or not...
OEM wire are solid copper....
I dont think stainless is a good material for plug wires....
If the wires are oiginal they are probably still good... often people change them and the replacemetns dont last
The temp senders are in the waterpipe on the pass.
side of the head near the front.