Hasn't Anybody Changed the Heater Hoses?
Any help would be appreciated...Thanks Gary NJ
I replaced them when I install a DASC.
It will be much easier if the manifold is off. Also DO NOT forget some of the plastic elbows that are on the back of the head. This is not a difficult job but very time consuming.
96 1.9 Z3 black/tan/black
97 M3/4 estoril/gray
08 Kubota 3400 HST orange/charcoal
08 GMC Sierra stealth gray/gray
<IMG src="http://mydrive.roadfly.com/photos/pic.php?u=6602WXkCK&i=13842" height=200 width=267>
Re: I replaced them when I install a DASC.
Does the entire intake manifold have to come off or just the top half? Also, you mention some plastic elbow(s) could you refer me to a diagram? Thanks Gary NJ
Find a good independent shop
The dealer will rape you in dollars. These cars are old now and there are plenty of good independent shops out there that have the experience to do a good job. They’ll charge you less in labor and if you find a good one like I have he’s got good deals on parts from shops in the area. If you’re not hung up on OEM parts look elsewhere.
Kind of late to the game but
this thread might be relevant to a '96, not sure: