UUC Clutch line install...bleed again?
I had a BMW shop put on my UUC clutch line as bleeding
that slave is a PAIN...
Clutch works fine..but I now have an inch of VERY EASY
pedal movement before I feel like I am doing anything.
Clutch grabs near the floor, but it did that with the
old clutch line.
Is there an Air Pocket in that slave that I am compressing?
Do I need to bleed that slave again?
Re: UUC Clutch line install...bleed again?
Eh, i doubt it's an air pocket.
Sounds like a mechanical/linkage thing.
Just so long as two or three quick clutch engage/dis-engages don't have obviously different friction-points.
Sounds same as my stock setup - pretty close to the floor, but it works/worked fine for 50k miles (so far!).
<IMG SRC=http://mydrive.roadfly.com/photos/pic.php?u=73302r2fUS&i=2642><FONT FACE="Comic Sans MS" COLOR=Gray SIZE=+1>PaulR</FONT>
<FONT COLOR=Black>'CCA Memb #8743
'99 M-Coupe - Silver/Black
'85 325e - my "Ol' Paint"
'96 VFR750F - smooooth
'86 Ducati 750-F1 - raw, obnoxious</FONT>
Seems just FINE after a few weeks!!!