+ Reply to Thread
Results 1 to 13 of 13

Hybrid View

  1. #1
    Registered Member
    Location
    , ,
    Member No: 79514 mollyshark is an unknown quantity at this point mollyshark's Avatar
    Join Date
    Jun 2003
    Posts
    466
    Rep Power
    0


    Yes | No

    Stone and chip protection in this area?

    I'm sure this has been discussed before, but as of yesterday I am officially old so you have to humor me.

    The Z has several little stone chips on the hood needing touchup and then I want to get the front wrapped in that clear film to protect it from further damage. Who/what is the best in the D/FW area to handle this?

    Tanx.

    mShark

  2. #2
    StuM
    Guest
    Location
    , ,
    Member No: StuM's Avatar


    Yes | No

    Re: Stone and chip protection in this area?

    I had my Z8 done through Autobahn in Ft Worth. I forget who they used, but he was a local guy who they use all the time. The 3M film has worked out very well. I put it on the hood/nose and along the rear of the cockpit where the hard top rests on the body. Great stuff!
    Good luck.

  3. #3
    Registered Member
    Location
    , ,
    Member No: 20685 thegunguy is an unknown quantity at this point thegunguy's Avatar
    Join Date
    Dec 2001
    Posts
    40
    Rep Power
    0


    Yes | No

    Re: Stone and chip protection in this area?

    How long ago did you have yours done? I took mine by Autobahn to see about the same. They had a guy onsite that does the install, but they only use precut patterns, which have a maximum width of 24". So, there's a lot of hood left unprotected. They'll do the install for $500.

    I'm more interested in the large sheet wrap similar to one of the project cars at Discovery Automotive.
    http://www.discovery-automotive.com/portal/modules.php?name=Static_Content&id=107


  4. #4
    MollyShark
    Guest
    Location
    , ,
    Member No: MollyShark's Avatar


    Yes | No

    You're hearing what I heard.


  5. #5
    pandaman
    Guest
    Location
    , ,
    Member No: pandaman's Avatar


    Yes | No

    Gunguy call me

    Dennis
    Pandaman 817-488-4151

  6. #6
    Registered Member
    Location
    , ,
    Member No: 37119 shadowman is an unknown quantity at this point shadowman's Avatar
    Join Date
    May 2002
    Posts
    200
    Rep Power
    0


    Yes | No

    Re: Stone and chip protection in this area?

    The pictures on the web site do not do the process justice..... First of all the film used is not 3M for a couple reaons that at this moment are not important what is however id the fact that the film is so fricken clear and smooth that even with you hands on it it can not tell there is a coating...... no seams......... In a word.....awesome..... then add to this the team that installs it for us will travel.......

    If you have any questions please call or PM me.

    BTW, they do complete body wraps too for the truly extreme..... they just comleted two Porsche GT's and a Ford GT last week........ not to mention the ENZO's they have done too.

    Take care

    ShadowmanShadowman

  7. #7
    Registered Member
    Location
    San Juan Capistrano, california, United States
    Member No: 10561 z8.bob is an unknown quantity at this point z8.bob's Avatar
    Join Date
    Jun 2001
    Posts
    68
    Rep Power
    0


    Yes | No

    What website?

    I must be out of it today. Where can I "go" to see what you are talking about?
    .
    .
    .<b><font Alpine><color <Gray> <Size 3>... NEXT ONE is 1 of 150</b>

  8. #8
    Registered Member
    Location
    , ,
    Member No: 37119 shadowman is an unknown quantity at this point shadowman's Avatar
    Join Date
    May 2002
    Posts
    200
    Rep Power
    0


    Yes | No

    Re: What website?

    Hi Bob:

    www.Discovery-Automotive.com

    I share the process as being installed on the Lamborghini however for the Z8 the process remains the same.

    Have a great day

    ShadowmanShadowman

  9. #9
    thegunguy
    Guest
    Location
    , ,
    Member No: thegunguy's Avatar


    Yes | No

    Shadowman - not sure how to PM on this board.

    I'm interested to see if those guys could give me a lead on a similar service in my area. Do they have a web address, email, etc.?

  10. #10
    Registered Member
    Location
    , ,
    Member No: 37119 shadowman is an unknown quantity at this point shadowman's Avatar
    Join Date
    May 2002
    Posts
    200
    Rep Power
    0


    Yes | No

    Re: Shadowman - not sure how to PM on this board.

    I have their number on my web site or you can call me directly and i will gladly assist as I can.

    Takes care

    ShadowmanShadowman

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum