KKK K27 Turbo kit in E34 535i... suggestions?

[blitzlinger]

Greetings! I hang around on the E34 board alot, but like many here, I am new to this feild... but I sure want to learn. I was looking into a KKK K27 Turbo taken out of a '84 745i, and I wanted to know how does everybody manage the fuel and spark timing issues? Or I should just hook up the turbo and not worry about it? Please give me your input... thanks!

Cheers,
Blitzlinger

[dieseldoc1]

That will be your best and safest way to control the engine. Just chucking on a turbo with no more fuel is like reusing someone elses profalactic, it just is'nt right

[blitzlinger]

what do you recommend for a turbo compatible ECU for a '90 535i Automatic? Thanks!

Cheers,
Blitzlinger

[gunter]

[Chad]

that I have ever seen!

[papajetta]

her's the real deal with the e34-745i bolt on...
in order to run the stock 8psi, u will need at least a rrfpr plus msd.
u need to tap your head to 10x1.5.
the compression is just to high, and the turbo is undersized to runmore than 8 psi on that motor.

[Velocewest]

[Velocewest]

[revhigh]

---

"It's all about performance."

---

"Once in a while you get shown the light in the strangest of places if you look at it right."


On the dyno for tuning.
"Proven performance from the street, for the street. When performance matters, RevHigh!"
RevHigh Motorsports

[RaM]

the stock 535 M30B34 engine can handle 8psi safe without worrying bout the internals or anything else!