+ Reply to Thread
Results 1 to 2 of 2
Thread: It won't start!
03-26-2006 11:43 PM #1
It won't start!
This problem has me stumped. When the car is hot, after running for say, twenty minutes or more, it will not start back up after I shut it off. It always starts when it is cold. And usually, though not always, it will start after it sits for a while.
The problem is electrical, not fuel.
I have already changed the coil, caps and rotors.
Does any one have ANY idea what this could be?
03-27-2006 03:19 PM #2
Flywheel reference sensors.
Check the flywheel reference sensors. When they start to fail they can get flaky when hot. They are the 2 sensors located on the drivers side of the bell housing.
The 2 sensors are identical. Before you remove them *BE SURE* to note where they are plugged so you can plug them back into the proper connectors when done. Otherwise the car won't start at all.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)