+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Location
    , ,
    Member No: 80344 Timmaaay is an unknown quantity at this point Timmaaay's Avatar
    Join Date
    Jul 2003
    Posts
    13
    Rep Power
    0


    Yes | No

    It won't start!

    This problem has me stumped. When the car is hot, after running for say, twenty minutes or more, it will not start back up after I shut it off. It always starts when it is cold. And usually, though not always, it will start after it sits for a while.

    The problem is electrical, not fuel.

    I have already changed the coil, caps and rotors.

    Does any one have ANY idea what this could be?

    Thanks


  2. #2
    Registered Member
    Location
    , ,
    Member No: 23679 digdesign is an unknown quantity at this point digdesign's Avatar
    Join Date
    Jan 2002
    Posts
    161
    Rep Power
    0


    Yes | No

    Flywheel reference sensors.

    Check the flywheel reference sensors. When they start to fail they can get flaky when hot. They are the 2 sensors located on the drivers side of the bell housing.

    The 2 sensors are identical. Before you remove them *BE SURE* to note where they are plugged so you can plug them back into the proper connectors when done. Otherwise the car won't start at all.

    http://www.s14.net/forums/showthread...threadid=13936

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum