+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    MikeB
    Guest
    Location
    , ,
    Member No: MikeB's Avatar


    Yes | No

    Cam Timing on a Euro

    Putting my euro back together. I set the cams in ok but having a hell of time getting the timing right. I set the TDC and notches like the manual says, but when I put the tensioner on and rotate the engine I'm about a 1/2 a notch off on the cams when the crank comes back to TDC.

    How close should it be? Manual says to install the intake side first pulling the chain tight then install the exhaust. Done that but steel off.


  2. #2
    sw
    Guest
    Location
    , ,
    Member No: sw's Avatar


    Yes | No

    this link might shed some light on that question

    http://bimmer.roadfly.com/bmw/forums/e28m5/7927641-1.html

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum