Results 1 to 1 of 1
Thread: TPS help again
10-15-2006 08:19 PM #1
TPS help again
In an effort to repair my high idle problem I replaced the throttle position switch. Removed the original and found the intake butterfly shaft connected to the switch and intake butterfly had broken, obviuosly rendering the TPS inoperable.
I bought a new (used) butterfly from Turner and now realize the intake butterfly replacement is more involved than I thought and am going to bring it to the shop. With the TPS diconnected the idle is waay to high. If I use a screw driver and turn the sw counterclockwise/and apply pressure the idle is low again. How do I keep the idle low for the drive to the shop?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)