+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Location
    , ,
    Member No: 132691 hoodwink33 is an unknown quantity at this point hoodwink33's Avatar
    Join Date
    Oct 2005
    Posts
    119
    Rep Power
    0


    Yes | No

    E39 Xeon upgrade question

    I recently purchased a set of used xeons for my 97 540. other than the ballasts which I don't currently have, which else is needed to pull off the switch. I've read something about resistor packs. Any and all help is appreciated.




    '97 540i/a 113k
    Dension Icelink in trunk
    M5 Replicas(not pictured)
    Falken 235/45/17(not pictured)
    Cleartails(not pictured)
    Dinan Stage 2
    Dinan CAI
    Dinan Tranny SW
    Dinan High Flow air Meter
    Sheep Skin Seat covers front seats :-)
    Wish List:
    Dinan Stage 1 Suspension
    Dinan Stage 4/5 engine SW
    Free Flow Exhaust
    MTec front and rear bumpers




  2. #2
    dustin
    Guest
    Location
    , ,
    Member No: dustin's Avatar


    Yes | No

    Re: E39 Xeon upgrade question

    saw your post on line about flickering hid aftermarket, i had the same problem only happens after i start the ignition, anyway to make a long story short, I'm using the 12 v source from the foglights instead and it is perfect, you have to turn on the foglights to activate hid but who cares saved 2 grand having it done at the dealer, plus when you do turn on the regular lights my fog lights go on, because i routed the low beam power to the fogs, anyway very very happy I fugured that out.

    thought you would like to know this info.

    Dustin

    very happy z4 owner

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum