+ Reply to Thread
Results 1 to 17 of 17
  1. #1
    Registered Member
    Location
    , ,
    Member No: 36263 UMP is an unknown quantity at this point UMP's Avatar
    Join Date
    May 2002
    Posts
    2,025
    Rep Power
    0


    Yes | No

    Recommendations on garage cabinets ?



  2. #2
    Registered Member
    Location
    , ,
    Member No: 36263 UMP is an unknown quantity at this point UMP's Avatar
    Join Date
    May 2002
    Posts
    2,025
    Rep Power
    0


    Yes | No

    I'm going with these. Very nice look and feel


  3. #3
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    I bought the large cabinets for $179.00 @ d store.



    "It's all about performance."



    "Once in a while you get shown the light in the strangest of places if you look at it right."


    On the dyno for tuning.
    "Proven performance from the street, for the street. When performance matters, RevHigh!"
    RevHigh Motorsports

  4. #4
    Registered Member
    Location
    , ,
    Member No: 36263 UMP is an unknown quantity at this point UMP's Avatar
    Join Date
    May 2002
    Posts
    2,025
    Rep Power
    0


    Yes | No

    What is "d-store" ? Sears ?


  5. #5
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    yes Sears store. I also just bought the Gladiator

    roll cabinets (floor) for $99.00 each and a covered film work bench top. I'm making my own work bench area out of them. 2 cabinets= 200.00 + the work bench top for $79.00 and I have a usable 6' work bench along with extra cabinets with roll out drawers and on casters. I can fold up the workbench and move it if I need more room and roll out the cabinets.

    This was the best mobile solution for my garage needs. I'll post pics once I'm done with the garage project.

    "It's all about performance."



    "Once in a while you get shown the light in the strangest of places if you look at it right."


    On the dyno for tuning.
    "Proven performance from the street, for the street. When performance matters, RevHigh!"
    RevHigh Motorsports

  6. #6
    Registered Member
    Location
    goleta, CA, United States
    Member No: 46996 tjm3 is an unknown quantity at this point tjm3's Avatar
    Join Date
    Aug 2002
    Posts
    148
    Rep Power
    0


    Yes | No

    www.listaintl.com


  7. #7
    Registered Member
    Location
    , ,
    Member No: 36263 UMP is an unknown quantity at this point UMP's Avatar
    Join Date
    May 2002
    Posts
    2,025
    Rep Power
    0


    Yes | No

    Yes, I will buy them at the store too.

    How do you like the Gladiator work top with rolling cabinets underneath?
    I might have to get those as well. I'm very excited about this project! We are moving into another home and I'm trying to transform a freestanding 1200 square ft. pole barn into one cool garage!
    Slop sink, car cleaning area with floor drain, work lift, quickcrete epoxy floor, 7-eight foot T8 strip lights, heating and AC, 220V, electric outlets every 3ft along every wall, all insulated building with painted half inch plywood walls, urinal, security system, 400 square ft. attached storage building with covered breezeway, 8ft back door and 16ft. front door, etc.
    Can't wait to show pictures.
    Sorry, I'm so giddy.

  8. #8
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    That sounds like fun....

    I have a carriage house that I turned into a garage with an apartment above. I have cable running into the place and am going to setup LCD flat screens in the corners along with internet access.
    The carriage house two large double doors and a side entry small garage door to replicate the two upfront. The steel I beam serves as the engine puller.

    I have 220volt on either sides of the walls and HVAC system in place. I just layed down the race deck tiles. It is about 700sq ft area of garage area. Small but cozy. I need a good organization system.

    I'll post pics soon.

    "It's all about performance."



    "Once in a while you get shown the light in the strangest of places if you look at it right."


    On the dyno for tuning.
    "Proven performance from the street, for the street. When performance matters, RevHigh!"
    RevHigh Motorsports

  9. #9
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    Several people around me have done the same

    as you are. That would be a really cool garage. Look forward to hearing about it when you are done.

    "It's all about performance."



    "Once in a while you get shown the light in the strangest of places if you look at it right."


    On the dyno for tuning.
    "Proven performance from the street, for the street. When performance matters, RevHigh!"
    RevHigh Motorsports

  10. #10
    Registered Member
    Location
    goleta, CA, United States
    Member No: 46996 tjm3 is an unknown quantity at this point tjm3's Avatar
    Join Date
    Aug 2002
    Posts
    148
    Rep Power
    0


    Yes | No

    Re: www.listaintl.com

    The forum heading IS ULTRA garage, isn't it?

  11. #11
    Registered Member
    Location
    , ,
    Member No: 36263 UMP is an unknown quantity at this point UMP's Avatar
    Join Date
    May 2002
    Posts
    2,025
    Rep Power
    0


    Yes | No

    Yes, but I don't have the"ultra" money.

    I'll stick with the stuff from sears :-)

  12. #12
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    I put one of the cabinets together this weekend...

    The instructions say two people but I did it by myself ok. It takes time to put these guys together. Once fully assembled they look great with a really nice finish. They are large cabinets with excellent storage potential because of the depth. I'm very pleased with them and can't wait to finish the other two and start using them.


    "It's all about performance."



    "Once in a while you get shown the light in the strangest of places if you look at it right."


    On the dyno for tuning.
    "Proven performance from the street, for the street. When performance matters, RevHigh!"
    RevHigh Motorsports

  13. #13
    Registered Member
    Location
    , NC, United States
    Member No: 13147 tomcat is an unknown quantity at this point tomcat's Avatar
    Join Date
    Aug 2001
    Posts
    559
    Rep Power
    0


    Yes | No

    Home center cabinets

    Lowes or Home Depot...
    email for pics
    [email protected]

  14. #14
    Registered Member
    Location
    , ,
    Member No: 150035 head_dunce is an unknown quantity at this point head_dunce's Avatar
    Join Date
    Feb 2007
    Posts
    3
    Rep Power
    0


    Yes | No

    Re: Recommendations on garage cabinets ?


    I bought these cabinets and am happy so far. I think I would have went with the butcher block top instead of the stainless if was to do it over.

  15. #15
    Registered Member
    Location
    , ,
    Member No: 175220 Moorestuff is an unknown quantity at this point Moorestuff's Avatar
    Join Date
    Jul 2009
    Posts
    1
    Rep Power
    0


    Yes | No

    Re: Yes, but I don't have theultra money.

    I thought the same thing but I really liked the Moduline Cabinets. I talked the the people there and they showed me how to add cabinets 1 at a time as I got the money. Their cabinets have a Baked Enamel finish and there is not color match problems.
    I love the folding workstations cause they don't interfere with the my car and they are a good worksurface.
    www.modulinegarage.com has a photo gallery and my garage is on page 2, photos 056 and 057.
    I know I won't be replacing the cabinets every couple of years and I can take them of the wall and bring them along if I should move.

  16. #16
    User Level 1
    Location
    , ,
    Member No: 193816 smithleeds42 is an unknown quantity at this point smithleeds42's Avatar
    Join Date
    Aug 2012
    Posts
    1
    Rep Power
    0


    Yes | No
    I use Garage123 18 gage wall cabinet having a metal thickness of about 0.05 inch. The doors are grey in color with black frame and the tool drawer is lockable. Good product and no issues yet. They also carry base cabinets. You may consider this company. For details visit http://www.garages123.com/
    Reply With Quote Reply With Quote 58.68.23.195

  17. #17
    Registered Member
    Location
    , , Canada
    Member No: 200259 Nasher is an unknown quantity at this point Nasher's Avatar
    Join Date
    Feb 2014
    Posts
    5
    Rep Power
    0


    Yes | No
    How about custom aluminum cabinets .
    Reply With Quote Reply With Quote 119.94.110.39

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum