+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Carbondale, CO, international
    Member No: 4519 rastus is an unknown quantity at this point rastus's Avatar
    Join Date
    Nov 2000
    Rep Power

    Yes | No

    clutch slave cylinder

    I am trying to pressure bleed a 5 speed clutch slave cylinder. I have it removed from the bell housing and the bleed screw is upand open. While bleeding it my daughter pushes the clutch pedal and the cylinder pops out of the housing. I manage to get it back in place and my question now is the seal damaged? I can't seem to get the clutch to disengage enough to put it in first or reverse.

  2. #2
    arizona 02
    , ,
    Member No: arizona 02's Avatar

    Yes | No

    try bleeding it again , if the rubber is damage

    you will be able to see it when its apart. Do you have a c clamp that can be place on the slave to stop the piston from coming out ?

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)



Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum