+ Reply to Thread
Results 1 to 4 of 4
Thread: radiator thermo switch connector
09-16-2007 08:36 AM #1
09-20-2007 07:08 AM #2
09-25-2007 10:09 AM #3
Re: radiator thermo switch connector
Your three wires should be: green/black, black/brown, and black.
Now look into the thermo-switch connector, where the pins stick out. You may need to drain the coolant a bit and remove it. The green/black wire should go to pin labeled '1'. Black goes to pin '2'. Black/brown goes to pin '3'.
08-04-2008 01:40 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)