+ Reply to Thread
Results 1 to 19 of 19

Hybrid View

  1. #1
    Registered Member
    Location
    , , United States
    Member No: 120934 meyere30 is on a distinguished road meyere30's Avatar
    Join Date
    Feb 2005
    Posts
    9,815
    Rep Power
    21


    Yes | No

    HELLLLOOOOOOOOOOOOO! Picked up some wheels.

    I got these today for $100. I am going to put them on but want to remove the studs. Is this posible with these cars. Oh its a 1969 1600. I would like to use regular type lug bolt.
    [IMG]Photo Sharing and Video Hosting at Photobucket[/IMG]

  2. #2
    Registered Member
    Location
    Elmendorf, TX, United States
    Member No: 21410 02Les is an unknown quantity at this point 02Les's Avatar
    Join Date
    Dec 2001
    Posts
    110
    Rep Power
    0


    Yes | No

    Re: HELLLLOOOOOOOOOOOOO! Picked up some wheels.

    Not sure why you would want to change the fixing mode. The wheels look like E21 "turbines" and will fit fine with the studs. Just get the correct angled alloy wheel lug nuts.

  3. #3
    Registered Member
    Location
    , , United States
    Member No: 120934 meyere30 is on a distinguished road meyere30's Avatar
    Join Date
    Feb 2005
    Posts
    9,815
    Rep Power
    21


    Yes | No

    1 of them was replaced and is real long.

    This 1 will have to be removed. Was just couriuos. Since this is not the case with these hubs they will stay. And yes I pulled these from an e21.

  4. #4
    Registered Member
    Location
    , , United States
    Member No: 120934 meyere30 is on a distinguished road meyere30's Avatar
    Join Date
    Feb 2005
    Posts
    9,815
    Rep Power
    21


    Yes | No

    This is what is on there now. Are these nuts

    useable with the new rims? I would thing they would be.

  5. #5
    Registered Member
    Location
    , , United States
    Member No: 120934 meyere30 is on a distinguished road meyere30's Avatar
    Join Date
    Feb 2005
    Posts
    9,815
    Rep Power
    21


    Yes | No

    The pic might help :)


    [IMG]Photo Sharing and Video Hosting at Photobucket[/IMG]

  6. #6
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    Yes but the longer chromed nuts with the cap

    would look much better.

  7. #7
    Les
    Guest
    Location
    , ,
    Member No: Les's Avatar


    Yes | No

    Re: The pic might help :)

    The original 02 lug nuts for steel wheels have a different chamfer/angle where they meet the wheel. They will chew up the alloy wheel when you tighten them up, and could be unsafe. BMW made lug nuts with a steeper (I think) angle to suit the alloy wheels.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum