+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Registered Member
    Location
    greenwood, NE, United States
    Member No: 75122 clinta74 is an unknown quantity at this point clinta74's Avatar
    Join Date
    May 2003
    Posts
    678
    Rep Power
    0


    Yes | No

    heater hoses 86 535i

    Last year my 86 535i had a NO HEAT problem, which ended up being a blocked heater core. The core has been replaced, thing is I had deplumbed the heater valve. Now I don't remember where the hoses go. Actually just the "Hose - Heater Core to Tee". I was thinking nipple to core, core to valve, valve to water pump. I just don't remember a 'T', but I have a replacement hose with a plastic 'T', so it must go someplace....


  2. #2
    Registered Member
    Location
    Newport Beach, CA, United States
    Member No: 139980 KevinD is an unknown quantity at this point KevinD's Avatar
    Join Date
    Apr 2006
    Posts
    166
    Rep Power
    0


    Yes | No

    Did you check ETK?

    1985 528e (10/84)
    1986 L7 (04/86)
    Newport Beach, CA

  3. #3
    Registered Member
    Location
    greenwood, NE, United States
    Member No: 75122 clinta74 is an unknown quantity at this point clinta74's Avatar
    Join Date
    May 2003
    Posts
    678
    Rep Power
    0


    Yes | No

    electrotelekarmuniging?

    No, really I was at work, didn't have any references and was looking if I was going to need to order something.

  4. #4
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    Here is the hose and tee, it goes to the tank and

    to the thermostat housing area. The tee comes from the heater.
    http://www.realoem.com/bmw/showparts...62&hg=11&fg=35

  5. #5
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    Here is the valve and the other hoses. One comes

    off the back of the cylinder head and one goes to the Tee in the other diagram and of course 2 connections on the valve and 2 on the heater core. Hope this helps.
    http://www.realoem.com/bmw/showparts...69&hg=64&fg=18

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum