+ Reply to Thread
Results 1 to 4 of 4

Thread: CV joint Q

  1. #1
    Registered Member
    Location
    , ,
    Member No: 52212 RCncrew is an unknown quantity at this point RCncrew's Avatar
    Join Date
    Oct 2002
    Posts
    5
    Rep Power
    0


    Yes | No

    CV joint Q

    What size allen wrench is needed for removal of the cv joint to differential on my 1973 2002? I found a replacement halfshaft and I need to remove it from the donor car.

    TIA


  2. #2
    Arizona 02
    Guest
    Location
    , ,
    Member No: Arizona 02's Avatar


    Yes | No

    this is the 6mm socket I use, 3/8 drive

    and hold the axle still using a pipe wrench if those bolts are really tight.
    http://buy1.snapon.com/catalog/item....1&group_ID=150

  3. #3
    Registered Member
    Location
    , ,
    Member No: 52212 RCncrew is an unknown quantity at this point RCncrew's Avatar
    Join Date
    Oct 2002
    Posts
    5
    Rep Power
    0


    Yes | No

    Re: this is the 6mm socket I use, 3/8 drive

    Thanks Arizona, it's been awhile and I forgot the size.

  4. #4
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    Be sure you clean the socket real good 1st, so the

    Allen wrench is fully seated.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum