+ Reply to Thread
Results 1 to 3 of 3
Thread: Rear Window Defrost Relay PN?
12-31-2008 12:29 AM #1
01-01-2009 12:58 PM #2
Re: Rear Window Defrost Relay PN?
check the wiring/ETM diagrams http://www.e38.org/e32/
for your production yea. Check the shape of the spaces of that socket and you should be able to find it in the ETK then.
The control is made by the IHKA control module.
The white connector at the back of the IHKA control module is called X610.
Pin 7 goes to the relay for defogging
pin 24 goes to relay K8 for front window heater (wiper base).
The pins are from left to right
13 12 11 10 9 8 7 6 5 4 3 2 1
26 25 24 23 22 21 19 18 17 16 18 14
So, if nothing helps, also open the IHKA module and resolder it.
More info with regard to IHKA
To start with the repair, this explains you the whole system
Shogun E32 Tech Tips: http://twrite.org/shogunnew/topmenu.html
01-06-2009 10:52 PM #3
- Castro Valley, CA, United StatesMember No: 13814
Inner Circle ©160 since: Aug 14, 2003
- Join Date
- Sep 2001
- Rep Power
Have you checked fuse under rear seat?
In my case the fuse area was charred (fuse eventually blown), and I think the current drawn to the rear window defrost lines had been too close to the max fuse rating that the contacts to the fuse progressively rose in temperature as the contacts aged and oxidized further. I now replaced the fuse, and did a bit more in re-rerouting the defroster line circuit to reduce current drawn to below half of what it used to be. The latter can work out only because the car is in a mild weather region.Patrick C 88 750 159K
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)