+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Registered Member
    Location
    San Diego, CA, United States
    Member No: 68071 golfrako is an unknown quantity at this point golfrako's Avatar
    Join Date
    Mar 2003
    Posts
    656
    Rep Power
    0


    Yes | No

    "Brake Light Ckt"...What is this?????

    I stepped on brake last night, then this shows up on the console. After parking and using for a few hours, upon start up, no more message. Then it happened again this morning on a stop light close to work. Both brake lights work. Brake pads and rotor does not have more than 6K miles on them after replacement.....what gives? Thanks.Boots
    BMW CCA San Diego Chapter #192742
    '89 325i ///M Technic II Coupe.....Son took over
    '90 M3 Garage Queen...still mine
    '92 525i 5 spd....new daily driver
    '03 530i 5 spd Sport Package S.O.'s toy.....my headache.
    [IMG]


  2. #2
    CO535i
    Guest
    Location
    , ,
    Member No: CO535i's Avatar


    Yes | No

    Brake light switch

    Had the same "warning", changed the switch all is well.

  3. #3
    Registered Member
    Location
    San Diego, CA, United States
    Member No: 68071 golfrako is an unknown quantity at this point golfrako's Avatar
    Join Date
    Mar 2003
    Posts
    656
    Rep Power
    0


    Yes | No

    Switch?

    Is this the switch in which the brake foot pedal hits/touches and presses in in the foot well? Thanks.Boots
    BMW CCA San Diego Chapter #192742
    '89 325i ///M Technic II Coupe.....Son took over
    '90 M3 Garage Queen...still mine
    '92 525i 5 spd....new daily driver
    '03 530i 5 spd Sport Package S.O.'s toy.....my headache.
    [IMG]

  4. #4
    Registered Member
    Location
    San Diego, CA, United States
    Member No: 68071 golfrako is an unknown quantity at this point golfrako's Avatar
    Join Date
    Mar 2003
    Posts
    656
    Rep Power
    0


    Yes | No

    Re: Follow-up ......Brake light switch

    RealOEM states there are two stop switches...did you replace both switches or just the round cylindrical or the box rectangular? Thanks again....Boots
    BMW CCA San Diego Chapter #192742
    '89 325i ///M Technic II Coupe.....Son took over
    '90 M3 Garage Queen...still mine
    '92 525i 5 spd....new daily driver
    '03 530i 5 spd Sport Package S.O.'s toy.....my headache.
    [IMG]

  5. #5
    CO535i
    Guest
    Location
    , ,
    Member No: CO535i's Avatar


    Yes | No

    only replaced the one on the pedal

    you have either-or, not both

  6. #6
    Registered Member
    Location
    Lexington, KY, United States
    Member No: 62972 russcasey is an unknown quantity at this point russcasey's Avatar
    Join Date
    Jan 2003
    Posts
    1,902
    Rep Power
    0


    Yes | No

    Re: only replaced the one on the pedal

    Same here. Only the pedal area. Mine is a automatic if it makes any difference. FYI, I had to break the old switch to remove it.
    Thanks, Russell

    1995 525i-Auto, M50TU-USA, E.A.T chip, 1/95 build, 225/60/15 Michelin Pilot Exalto A/S tires, 15" OEM cross spoke wheels, ASC+T, BMW-Alpine remote/Alarm, OBC, full leather/wood, heated seats, lumbar support, HID, BMW Alpine 5 radio/BMW-Pioneer CD Changer, 168.5k miles, Oxford Green/Parchment

  7. #7
    Registered Member
    Location
    , ,
    Member No: 127988 dartiii is an unknown quantity at this point dartiii's Avatar
    Join Date
    Jun 2005
    Posts
    10
    Rep Power
    0


    Yes | No

    Re: only replaced the one on the pedal

    Same, on my 95 525i. broke the old one to get it off. only replaced the pedal switch.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum