+ Reply to Thread
Results 1 to 12 of 12
Thread: Adjuster Unit 11617544805
12-01-2009 11:29 PM #1
Adjuster Unit 11617544805
The "adjuster unit" (Item Number 7 in the picture below or on attached link) on my 2002 3.0 is making a ticking noise.
It appears to be driven by a stepper motor and has ticked in the past and the stopped ticking. It appears the stepper motor is dithering back and forth as it idles.
I have removed it and cleaned it (the intake is filthy on the inside and encrusted with an unremovable yellow film which was also present on the underside of the valve cover.
Anyone experience this ticking? Should I be carrying a spare Adjuster unit. $200 part. Takes 2 seconds to replace.
Ideas? Car otherwise runs fine.
12-01-2009 11:36 PM #2
Some Links and possible answers.
I found this thread on the E36 forum (same engine, basically) with a video (see link below)
Mine does not rattle THAT BAD (and I would never let me engine get that filthy dirty!)
Nevertheless, it looks like I should at least keep an eye out for a used one to have as a spare, as it sounds like it will fail down the road, probably when I least want it to.
The thread claims that you can find one for $20
Here is a picture of the before and after from that thread. Mine looks like the "before" picture.
12-01-2009 11:41 PM #3
Claims the things can come apart and ingest parts into the engine.
The flap is not supposed to oscillate, but open and close above/below 3250 RPM to create different intake runner lengths for increase torque at low end, power at high end.
Sort of like the old Yamaha Ford SHO dual intake runner system:
05-18-2010 02:51 PM #4
01-04-2011 01:26 PM #5
05-06-2012 05:20 PM #6
Can Parts of a disa/adjuster unit be bought ?
I have a 2002 bmw x5 3.0i and it had a noise coming from the engine. The noise is louder when in drive and reverse and quieter when in park. I am hoping it is the disa/adjuster unit.
I took it out try to modify it and realize I need the plug that goes through the unit to the flipper. Can this piece be bought seperate. The unit is functioning. The flipper is not because of the plug being
05-12-2010 10:33 AM #7
Ordered a new one today
This part, also referred to as the DISA valve, is known to fail. I removed it today and the flapper is loose (hence the ticking) and the rivet holding the end of the flap on has nearly worn out.
So, time for a new DISA valve.
ECS tuning seems to have the best price, followed closely by Pelican.
05-13-2010 08:39 AM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)