+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Registered Member
    Location
    Tobyhanna, PA, United States
    Member No: 31059 wavell5er is an unknown quantity at this point wavell5er's Avatar
    Join Date
    Mar 2002
    Posts
    16
    Rep Power
    0


    Yes | No

    88 535is 2 crazy problem

    am having this problem for some time now.when driving and my rpm get around 2rpm its seem like i have a flat-spot or bocking, like am not getting no gas.the car idle fine and around 3rpm is fine no trouble.i change the afm,tune up,8mm wires,main realy and cpu. will try refrence sencer,trottle position senser.i have these parts around no problem.2 problem, when i start the car i notice all the light stays on.the only 1 goes off is the oil pressure light,i have to tap on the accelerator and they goes off. eny help wavell


  2. #2
    Jim
    Guest
    Location
    , ,
    Member No: Jim's Avatar


    Yes | No

    Re: 88 535is 2 crazy problem

    For problem 1- have u checked ur plugs? Less than $15 to replace. Use Bosch or ngk NOT platinum

    For problem 2- that is normal. Every e28 I've ever had did the same thing

  3. #3
    Ray7er6ers5er3er
    Guest
    Location
    , ,
    Member No: Ray7er6ers5er3er's Avatar


    Yes | No

    Distributer cap and rotor IMHO


  4. #4
    Registered Member
    Location
    Whitinsville, MA, United States
    Member No: 5828 fabrice002 is an unknown quantity at this point fabrice002's Avatar
    Join Date
    Jan 2001
    Posts
    344
    Rep Power
    0


    Yes | No

    #1 - check your AFM for smooth operation...

    ... if it hangs, even slightly, it could cause a bog.

    For #2, I agree with Jim - it's normal. Sometimes my car does it, sometimes it doesn't. Don't worry about it, just blip the throttle.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum