+ Reply to Thread
Results 1 to 6 of 6
Thread: unknown cable
03-29-2010 11:19 PM #1
03-29-2010 11:22 PM #2
03-30-2010 12:00 AM #3
Yeah, sure; looks like the end of the cable
that is supposed to get mounted in the glove box normally for the aux-in on your business radio. (could be the ipod input alternately)
Use the selection switch on your radio to select AUX in and then use a male to male connector to plug in your ipod or whatever mp3 device you choose for output. See if it plays on your car system.
03-30-2010 05:56 AM #4
03-30-2010 08:58 AM #5
- Fair Oaks, CA, United StatesMember No: 136377
- Join Date
- Jan 2006
- Rep Power
Yes that's an OEM aux input , not fully installed
I concur with Stinger9 on this one. I installed the OEM auxiliary input cable in my 330, and the input jack looked just like that before completing the installation. There is supposed to be a knurled nut that screws onto the threaded portion, the cable is designed to be installed through a hole you drill in the glovebox liner, insert the cable from the back, and secure it in place with the knurled nut. The cable was also supplied with a metal plate that says "AUX INPUT".
I installed mine per the "my330i dotcom" writeup (google "BMW aux audio input kit"), where I removed the switch strip just above the ashtray, and bored a hole in one of the unused button positions. I left off the cheesy-looking metal plate and just used the knurled nut to hold the jack in place. Looks very sanitary and Factory.
As Stinger9 noted, if you cycle the MODE switch on your radio, you should see AUX come up on the display. Plug an MP3 player into the jack and you should be golden.
My only caveat is that you should secure the jack to a surface, to prevent flexing of the cable near the jack end. There are electronic components under the heatshrink portion of the cable, and plugging/unplugging into the loose cable could damage the cable over time.
03-30-2010 05:26 PM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)