So Im have done extenssive research on changing my automatic transmission fluid in this forum and a recommendation was to change ATF multiple times untill clear then change filter. So, here is what i have done so far:
1. Initial ATF and filter, drove 50 miles or so then did just fluid change.
2. Drove 200 miles and changed again (just fluid)

For just the fluid change, i added 3.2 litters and checked fluid level and 30 min of driving....i can't read this thing as it's always full...The manual says 3.2 does this mean when you drop the fluid or dropping pan/filter? Please, help as i don't want to over fill. I will check again the level when it's cold.