+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Registered Member
    , ,
    Member No: 28209 jlharmony1 is an unknown quantity at this point jlharmony1's Avatar
    Join Date
    Feb 2002
    Rep Power

    Yes | No

    X3 Rear License Plate Mount Warning

    Went to remove the rear license plate on my '06 X3 and found the screws holding the plate to the mount were turning without loosening. I was finally able to get 3 of 4 off. At that point I removed the mount by removing the 2 torx head screws that hold it to the rear hatch sheet metal. The problem was caused by the screws slightly rusting to the nuts that are in turn held in place by rubber moldings. Of course, if there is much resistance as there was by a little corrosion between nut and bolt, the nuts simply turn in the rubber mount. The local BMW dealer's parts person said they keep them in stock because many people have the same problem that I had.
    Remove the 4 screws holding the plate on and coat them with a little amount of anti-seize compound (readily available at any auto parts store). This will allow them to come out easily in the future and prevent the nuts from turning in the rubber mount. This is especially important if you live in the northeast, ie road salt country.

    Jim in CO

  2. #2
    , ,
    Member No: EM's Avatar

    Yes | No

    Re: X3 Rear License Plate Mount Warning

    Thanks Jim. I had that same problem on my 3-series sedan. Solution: buy plastic bolts, available at host auto supply stores.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)



Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum