+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Location
    , ,
    Member No: 182664 william_2 is an unknown quantity at this point william_2's Avatar
    Join Date
    Aug 2010
    Posts
    1
    Rep Power
    0


    Yes | No

    Grounding problem/ for starter

    is it possible for anyone to give me a list of the locations of the grounds and where they should be on the 1980 320I? im getting power to my starter i can jump the starter to get it to work i have tested the black and yellow wire off the solenoid with a 12Volt light and it works but when connected to the the solenoid it will not light up there for i have a grounding problem, so can anyone help?


  2. #2
    Registered Member
    Location
    Willingboro, NJ, United States
    Member No: 32099 glotman is an unknown quantity at this point glotman's Avatar
    Join Date
    Apr 2002
    Posts
    137
    Rep Power
    0


    Yes | No

    Re: Grounding problem/ for starter

    chances are its the solonoid itself then, as the starter is grounded by virtue of it being bolted to the engine, which is in nturn grounded to the battery via several connections, including a large one on the underside of the engine.
    Geoff

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum