+ Reply to Thread
Results 1 to 3 of 3

Hybrid View

  1. #1
    Registered Member
    Location
    , ,
    Member No: 50707 dagmar_johnson is an unknown quantity at this point dagmar_johnson's Avatar
    Join Date
    Sep 2002
    Posts
    58
    Rep Power
    0


    Yes | No

    High-pressure power steering hose replacement

    All,

    is there anything specific to pay attention to when replacing the high-pressure power steering hose?
    Anybody have any step-by-step instructions handy?

    The manual just shows all parts and such, but not if there are any specific concerns.

    Dagi

  2. #2
    Registered Member
    Location
    , CA, United States
    Member No: 14509 m6bigdog is an unknown quantity at this point m6bigdog's Avatar
    Join Date
    Oct 2001
    Posts
    1,082
    Rep Power
    0


    Yes | No

    Re: High-pressure power steering hose replacement

    The clearance (arms, hands plus a wrench)for the steering box banjo bolt it tight. Getting the bolt off isn't that hard but lining up the banjo end of the hose, replacing the seals and bolt is!!
    I have R&R'ed the bolt and seals without lifting the driver side of the engine. However, I would suggest lifitng the engine is the better approach.Rod...
    BMWCCA GGC

  3. #3
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    My Indy always raises that motor mount a little.


+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum