+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Location
    , ,
    Member No: 138838 528elover is an unknown quantity at this point 528elover's Avatar
    Join Date
    Mar 2006
    Posts
    16
    Rep Power
    0


    Yes | No

    How to Remove Windshield Washer Tank

    I'm trying to replace the float sensor in my windshield washer tank because the rubber washer deteriorated and fell into the tank. In addition, I've noticed a bunch of crud sitting at the bottom of the tank. I've removed the a large flat black washer at the top rear of the tank (closest to the firewall), but the entire tank will not lift out.

    There doesn't seem to be any other visible bolt or screw holding this thing in. Anyone know how to remove it?

    Here is the ETK:

    http://www.realoem.com/bmw/showparts.do?model=4083&mospid=47228&btnr=61_0002& hg=61&fg=45

    Thanks in advance!


  2. #2
    Registered Member
    Location
    , ,
    Member No: 58142 ROYinGA is an unknown quantity at this point ROYinGA's Avatar
    Join Date
    Nov 2002
    Posts
    2,633
    Rep Power
    0


    Yes | No

    My 83 I model has a lug on the bottom front that

    seems to fit into a socket and has a wiring cable and some cable ties on it. Check if yours has some ties holding it from sliding back out of the socket.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum