+ Reply to Thread
Results 1 to 3 of 3
Thread: high voltage in fog lights
10-21-2010 12:55 PM #1
10-21-2010 02:06 PM #2
Re: high voltage in fog lights
12.6 to 14 volts is normal, but 100 watt lamps are not. The normal fog/driving lamps should be 55 watts- the same as your low beams. The higher wattage the lamp, the "Hotter" the lamp will burn and the shorter the life. Also make sure no moisture is entering the lamp houseing.
11-21-2010 09:35 AM #3
I once istalled instead of H1 55W in my dip lights socalled rally bulbs with 100W.
That cost me a fortune. The reflectors melted away= had bubbles from the heat as that reflectors OEM are plastic and the chrome is just 'sprayed' on, wires were bare up to the LKM.
Never again.Shogun E32 Tech Tips: http://twrite.org/shogunnew/topmenu.html
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)