+ Reply to Thread
Results 1 to 5 of 5

Hybrid View

  1. #1
    Registered Member
    Location
    Amelia Island, FL, United States
    Member No: 169336 mike630csi is an unknown quantity at this point mike630csi's Avatar
    Join Date
    Nov 2008
    Posts
    30
    Rep Power
    0


    Yes | No

    E36 328 hard-top headliner

    The headliner on the removable hard-top on my car is "sagging". What is best way to reattach it?

  2. #2
    Registered Member
    Location
    , ,
    Member No: 153514 trouble is an unknown quantity at this point trouble's Avatar
    Join Date
    May 2007
    Posts
    10
    Rep Power
    0


    Yes | No

    Re: E36 328 hard-top headliner

    This may not be a 'do it yourself' job. As far as I know there is no fixing a sagging headliner; just replacing.

    No idea where you are located. I'm in South West Ohio (USA) near Cincinnati and when my 1996 328is sunroof headliner started coming loose (and finally had to just be pulled off) I took it to a place called Fisher-Griffin that specializes in auto interiors. There are a few others in the general area that are also very good.

    It must also be a somewhat difficult job. Their number one guy was injured at the time and their number two guy was not willing to take on the job; have to appreciate that he didn't feel he could do a good enough job of it. So I waited for the top guy to be back at work to have the job done. Turned out really good.

    My point though is that this seems like something that requires an experienced professional in order to get good results. The regular headliner may not but the sunroof does.

    Good Luck!!!

  3. #3
    Registered Member
    Location
    , ,
    Member No: 25810 Rickllyell53 is an unknown quantity at this point Rickllyell53's Avatar
    Join Date
    Jan 2002
    Posts
    23
    Rep Power
    0


    Yes | No

    Re: E36 328 hard-top headliner

    Just a note, I removed mine and used adhesive remover to reveal a very nice shiny black finish.
    The fabric and adhesive provide some dampening as at some speed/road surface with the fabric removed there is some sun roof vibration noise.
    I was going to have it replaced, but because I don't really notice it and the noise is rare, I haven't.

  4. #4
    Registered Member
    Location
    Amelia Island, FL, United States
    Member No: 169336 mike630csi is an unknown quantity at this point mike630csi's Avatar
    Join Date
    Nov 2008
    Posts
    30
    Rep Power
    0


    Yes | No

    Re: E36 328 hard-top headliner

    Thanks for the follow-up. My E36 is a convertible and the hard-top comes off the car, I think it is aluminum. Sagging fabric is like very thin black polyester.

  5. #5
    Robert Platt Bell
    Guest
    Location
    , ,
    Member No: Robert Platt Bell's Avatar


    Yes | No

    Buy a new one, if you can afford it.


    I had two hard tops, one for each car. Both had sagging headliners.

    I bought a new headliner from ECS tuning, but it was like $300 plus truck freight shipping. That is the best way, although it is pricey. I tried to repair the other one and it didn't work very well. I have never had luck with trying to re-glue headliners, frankly.

    Re-gluing headliners is hard to do for any car. At least with the hard top, you can remove the top and then remove the headliner and work on it easily.

    I tried gluing one, and it didn't work very well. The fabric stretches and it pulls away from the glue. See link.

    The problem with all modern composite headliners (which are a three layer sandwich of cloth, foam, and then a cardboard or fiberglass backing panel) is that the cloth shrinks, and the foam disintegrates. It is not the glue, but the foam coming apart that does them in. The cloth shrinks, so when you try to re-glue it, it pulls away from the glue.

    I would suggest one of the following (other than buying a new one).

    1. Remove the headliner from the hard top and glue NEW FABRIC to it, as the old headliner fabric has shrunk. Be sure to scrape off all the old disintegrated foam first. If in doubt, take the backer panel to an upholstery shop and have them do it. It should not be too expensive that way.

    2. A cheaper and easier alternative would be to scrape down the backer panel (after removing it from the top) and then paint it with flat black spray paint, or that speckle trunk paint (black with specks) and re-install it. You'd probably never notice it wasn't OEM, if you had never seen one.

    That's all I know. The hard top rocks on this car. It really makes the car look nice.

    I sold both hard tops last year along with both cars. I miss them, but I am finally putting some miles on the M Roadster, which of course is starting to throw fits of its own.

    Time for a new seat belt switch...!

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum