+ Reply to Thread
Results 1 to 11 of 11
Thread: Front shock/strut rebuild cost
11-10-2010 05:40 PM #1
Front shock/strut rebuild cost
My 2001 530iA with 96.000 miles on the clock still has the original front shock/strut assemblies. This makes my everyday ride a "little bumpy" so......
My indy quoted me a little over $800 for new shock/strut assemblies (includes mounts, etc), labor and tax.
Seems like a "tall order" to me or is it a reasonable price to smooth out my ride?
11-10-2010 05:56 PM #2
11-10-2010 06:03 PM #3
Re: Not bad at all. Consider thrust arm bushings >>
Tie rods were replaced last year, upper control arms 2 yrs ago, alignment not included.....
Just shock/strut assemblies, labor and tax.
He quote $500 in parts (shock/struts, mount, etc) and $240 for labor (both sides) + tax....
Have new tires on them which helped a LOT even though somehow I can't warm up to them (Conti Xtreme Contact DWS) but that's a different story.
11-10-2010 06:15 PM #4
Depends on whose parts
For $500, he should be quoting actual BMW parts, not aftermarket. I just bought Sachs (OEM) struts from Bav Auto for $119 ea. To ensure a good ride, the "etc." should include new upper and lower rubber spring pads, bump stops and dust boots. Labor quote seems very good to me: I can't do struts in one hour per side, that's for sure.
'03 525i Sapphire Blu/Grey, SP, Nav
'02 325it Orient Blu./Grey, SP, Nav
'98 323is Arctic Sil./Blk, SP
'95 M3 Cosmos Blk./Blk
11-10-2010 07:40 PM #5
Wow, I just realized thats just the front struts >
That is a bit pricey. I read struts/shocks and assumed thats what you meant. If it is for front struts (plus pads and strut bearing) then its a bit high. It should be 3 hours labor plus about $300 in parts for the front. Check autohausaz.com for parts prices. Add 15% for fair indie prices. If it was within $100 of that I'd say its fair.
Rear parts are cheaper but should be 2hrs per side.
If you cant get a better quote than its not horrible. I could be better than a dealer quote, but not by much if at all.
11-10-2010 11:55 PM #6
11-11-2010 12:15 PM #7
Here is my DIY: ENTIRE Front end susp $1200
I did the ENTIRE Front end suspension for $1200 in parts.
Labor was mine.
My advice is do the whole front end as shown in my DIY below. One year later my car still drives like a charm. Get all your parts from EACTuning.com as in my DIY:
11-11-2010 01:16 PM #8
11-11-2010 08:55 PM #9
11-15-2010 11:42 AM #10
- Houston, TX, United StatesMember No: 133586
- Join Date
- Nov 2005
- Rep Power
That is a lot, though I bet that is normal.......
I paid my mechanic (and he came to my house and worked on it under my watchful eye) $1200 for every strut, suspension and steering parts.
On top of this, he did 2 cv joints on a different car.
Plus $120 for the alignment.
2000 540i Sport in Houston, TX
11-16-2010 08:16 AM #11
- Toronto-ish, , CanadaMember No: 16800
- Join Date
- Oct 2001
- Rep Power
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)