+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Registered Member
    Location
    , ,
    Member No: 119757 bshupe is an unknown quantity at this point bshupe's Avatar
    Join Date
    Jan 2005
    Posts
    13
    Rep Power
    0


    Yes | No

    M70 runs rough-cleaned DK motors-now EML

    I thought I kept everything in order, cleaning the DK motors. Now I get an EML and "ASC" not fuctioning. It is running on half cylinders. I reset the codes before I started her up per the "connect both battery cables together" per shoguns instructions. I tried it one more time and still I get EML and no ASC. Any indeas? I'm 95% sure all is good with the cleaning/overhaul of the DK motors.

    Thanks


  2. #2
    Registered Member
    Location
    , ,
    Member No: 14327 Highline is an unknown quantity at this point Highline's Avatar
    Join Date
    Oct 2001
    Posts
    2,155
    Rep Power
    0


    Yes | No

    did you check the battery voltage?

    maybe while working on the car the battery went down/weak and is weak, especially the 750 needs always a fully charged battery so that all the electronic gimmicks will work. If too low, electronic probs come up like ASC, EML, even the IHKA unit plays crazy, that is the first thing to check. Engine might still start with a weak battery, but it often runs then in limpmode.Shogun E32 Tech Tips: http://twrite.org/shogunnew/topmenu.html

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum