+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Registered Member
    Location
    AYR, , Australia
    Member No: 135692 kennyg54 is an unknown quantity at this point kennyg54's Avatar
    Join Date
    Jan 2006
    Posts
    93
    Rep Power
    0


    Yes | No

    MAF sensors and Oxygen Primary sensors

    My Australian Spec 1999 model runs excellent with one MAF(s) disconnected ! I replaced the one that registered as failed but now again I am having problems revving beyond 3000rpm ( ! ? ) Is it always advisable to replace both MAFs when only one is showing up as failing ( and then affecting the 2 primary 02 sensors which I have already replaced ! )Thanks...............Kennyg

  2. #2
    Registered Member
    Location
    AYR, , Australia
    Member No: 135692 kennyg54 is an unknown quantity at this point kennyg54's Avatar
    Join Date
    Jan 2006
    Posts
    93
    Rep Power
    0


    Yes | No

    Re: MAF sensors and Oxygen Primary sensors

    K & N Filter oil on MAFS has turned out to be the culprit !

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum