+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Registered Member
    Location
    Sussex Corner, , Canada
    Member No: 131524 gerald9400 is an unknown quantity at this point gerald9400's Avatar
    Join Date
    Sep 2005
    Posts
    83
    Rep Power
    0


    Yes | No

    2000 Z3 Spare Wires

    I am replacing the headlights with a set of projector / angle eye headlights from http://www.roadstersolutions.com/page107.html#482 and the are awesome.

    My question is that there are two pair of wires with plugs behind the right headlight that I would like to know what they are for.

    One appears to be brn/wt and brn/orn with a yellow female plug with 1/8 inch round connectors, keyed and A1 on the plug. The other is grn/blk and grn / yel (same size) with BMW 1 378 416 and FGO on it, it is black.

    Does anyone know what they are four? i looked through the service manual and cannot find any reference.

    Thanks, gm


  2. #2
    Registered Member
    Location
    , PacNW, This one
    Member No: 170217 Giznaz is on a distinguished road Giznaz's Avatar
    Join Date
    Dec 2008
    Posts
    511
    Rep Power
    8


    Yes | No

    The yeller one is for

    the temp sensor for the computer if installed. Dunno the white one.

  3. #3
    Registered Member
    Location
    Washington, DC, United States
    Member No: 143188 wcampbell6 is an unknown quantity at this point wcampbell6's Avatar
    Join Date
    Jul 2006
    Posts
    128
    Rep Power
    0


    Yes | No

    Not sure on the wires, but how are the new lights?

    Major improvement on nighttime visibility? I find the stock lights to be pretty bad.

  4. #4
    Registered Member
    Location
    Sussex Corner, , Canada
    Member No: 131524 gerald9400 is an unknown quantity at this point gerald9400's Avatar
    Join Date
    Sep 2005
    Posts
    83
    Rep Power
    0


    Yes | No

    Re: Not sure on the wires, but how are the new lights?

    They are great, well worth it. I have always missed the Angel Eyes and I love them plus the projector low beams are nice. Fit right in and you just have to wire the Angle Eyes up. I conected them to my parking lights and also ran wires to a switch next to the convertable top switch. There was a blank spot there so I ordered a switch on Ebay. It is a double so one is for the Angle Eyes and the other is for the blue ribbon light in the side gills. The only trouble is aiming them, just the same as any headlights. Cheers, gm

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum