+ Reply to Thread
Results 1 to 1 of 1
Thread: Brake Master Cylinder/Booster
03-04-2011 03:19 PM #1
Brake Master Cylinder/Booster
Since there are so many posts about this problem I thought I would add a little and ask a few questions as I am going through this now.
1.If you are leaking brake fluid ( clear ) from the little rectangular hole at the bottom of the Brake Booster then you have bad seals inside the Master Cylinder.Correct?
This is my current situation
2.The small pushrod between the MC and the Booster should be reinstalled with the small end towards the front of the car.Correct?
3.If you are leaking PS fluid ( red ) from the rectangular hole then the O ring has to be replaced.Correct?
Thanks to all the helpful knowledgeable folks who help us through these trials and tribulations!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)