+ Reply to Thread
Results 21 to 35 of 35
Thread: meltdown vid
-
03-13-2011 09:06 AM #21
-
-
03-13-2011 09:29 AM #22
-
03-13-2011 12:19 PM #23Registered Member
- Location
- , , United States
Member No: 27389
- Join Date
- Feb 2002
- Posts
- 10,925
- Rep Power
- 22
In hindsight you are always looking at some1s azz
However, because of the hydrogen production caused from boil off, the presence of specific isotopes indicating a partial meltdown, and the obvious explosion of the secondary containment, it seems clear that partal melt down has taken place.
Until you are able to take a look inside for me I think the video soeaks for itself, but I would caution you not put your dingus into any light sockets or you might wonder why you would get such a result from something you can not see.
-
03-13-2011 12:53 PM #24Registered Member
- Location
- Wilmington, DE, United States
Member No: 112690
- Join Date
- Aug 2004
- Posts
- 1,171
- Rep Power
- 0
Good Explanation here.
Pretty good explanation.
All the info isn't in so he had to assume a few things. The main problem is no power to run the heat exchangers to cool the suppression pool (which is used to cool the reactor). There are high pressure pumps that run off of the reactor steam that can continue to pump coolant into the core without electricity, but if the coolant gets too hot the pumps will cavitate and become ineffective or possibly fail.
Someone is going to have to clean up that mess. That could keep me busy for a while. GF won't approve, however.
-
03-13-2011 01:03 PM #25
-
03-13-2011 01:09 PM #26
-
03-13-2011 02:33 PM #27
-
03-13-2011 02:37 PM #28
-
03-13-2011 02:42 PM #29
-
03-13-2011 04:06 PM #30
-
03-13-2011 07:44 PM #31Registered Member
- Location
- Wilmington, DE, United States
Member No: 112690
- Join Date
- Aug 2004
- Posts
- 1,171
- Rep Power
- 0
If he's anything like me ...
He'd want to go to Fuku 1.
Remember the time I came back from Sweden and had to get right back on a plane for Japan. Utility didn't know why they couldn't move one of the control rods in the core. It had exploded and wedged itself between a couple of fuel bundles. I literally yanked one of the bundles loose by hand using a cable and tool we designed on the fly. Made it possible to get the other bundles out along with the damaged control rod blade.
You should try it sometime. :^)
-
03-13-2011 07:46 PM #32
-
03-13-2011 07:58 PM #33Registered Member
- Location
- Sunnyvale, CA, United States
Member No: 24397
- Join Date
- Jan 2002
- Posts
- 5,076
- Rep Power
- 17
Honestly, he is. Me too for that matter, just not
my field. I love the trouble calls when everyone else is in a panic. I also like the ego boost of being the guy they call when no one else can figure the problem out. My field is a different sort of engineering, but the trouble calls are all the same.
In my cousins case he is excited to be part of a reaction team. But, I know he is conflicted. He loves the chase, but he has a young family now. So it's not so much about him, it's about the family.
As it is, if he had the juice to be able to ask me to go with him to help, I would jump at it. Because I'm confident that we could make things safe over there, and get them back in control with some innovative ideas.
I can't imagine your scenario of a jammed rod. But, as long as you are only working on one at a time, you're golden. On a tour, I was able to see the purple/pink of the alpha glow on a rod before. That was pretty awesome.
-
03-13-2011 08:15 PM #34
-
03-14-2011 11:12 AM #35
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)



Reply With Quote





Bookmarks